"Tool Holders" in the category Business, Industry & Science

Welcome to Wunderstore, Britains's largest product search site with price comparison. You are currently in the Business, Industry & Science category in the "Tool Holders" department. With Wunderstore, you can browse more than 100 online shops for offers. In this way, you'll find almost every product from the Business, Industry & Science: Tool Holders section on our site that is currently available to buy online. And the best thing: not only will we show you which online shop you can currently buy the particular product you're looking for from, but we'll also let slip where you can buy that product at the best price!

To conduct a more targeted search, you can restrict the product selection to specific sub-sections. You can also run a specific targeted search for products from particular brands with us. Use the search field or the filter at the side for this. In this way, you can restrict the product selection to Haimer, Lyndex-Nikken, SCHUNK or Centaur, for example. You can also use the filter at the side to search for products in specific colours or within certain price segments. And if you're on the hunt for a bargain, use the "Sale Filter" to find currently reduced items. In any case, we hope that we can help you with your search for good, well-priced offers on the internet using our price comparison tool.

Tool Holders: How you can benefit from comparing prices

Price trend for the Tool Holders product range in the Business, Industry & Science product group

Online shops constantly optimise their prices. Some prices are updated several times a day and adapted in line with competitors’ offers. Our price trend shows you the trend development of prices for products in the Business, Industry & Science/Tool Holders product range over the last few weeks and months.

We also, however, tell you when you can typically pick up products from the Business, Industry & Science/Tool Holders product range at a particularly attractive price. A good time is, for example, on thursdays. For more details, see the price analysis graphs below.

By comparing prices, you can save a lot of money, in particular on big-ticket items. To make this extra easy for you, we show you for each product the online shop in which we found the current best offer and how much you can save in absolute and percentage terms with a price comparison.
Show details: When are products in the Tool Holders product range in the Business, Industry & Science product group particularly cheap?

Have you already thought about the right time to purchase of products in the Tool Holders product range in the Business, Industry & Science product group? We tell you the days of the week and specific times when the prices are particularly attractive.

Thursday is the cheapest day of the week
mon
tue
wed
thu
fri
sat
sun
On mondays, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. monday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On tuesdays, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. tuesday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On wednesdays, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. wednesday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On thursdays, products from the Tool Holders product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 2.1% lower than the average weekly price.
On fridays, products from the Tool Holders product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 1.4% higher than the average weekly price.
On saturdays, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. saturday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On sundays, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. sunday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
-2.1%
+2.1%
100%
Average price
Are you already doing something between 19:00 and 20:00?
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 0:00 and 1:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 1:00 and 2:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 2:00 and 3:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 3:00 and 4:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 4:00 and 5:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 5:00 and 6:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 6:00 and 7:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 7:00 and 8:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 8:00 and 9:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 9:00 and 10:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 10:00 and 11:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 11:00 and 12:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 12:00 and 13:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 13:00 and 14:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 14:00 and 15:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 15:00 and 16:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 16:00 and 17:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 17:00 and 18:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 18:00 and 19:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 19:00 and 20:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 20:00 and 21:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 21:00 and 22:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 22:00 and 23:00, they are, however, largely in line with the daily average.
The prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 23:00 and 24:00, they are, however, largely in line with the daily average.
-0.3%
+0.3%
100%
Average price
It is probably not a bad idea to shop online for Tool Holders on thursday between 6:00 and 12:00.
Monday
0-6
6-12
12-18
18-24
Tuesday
0-6
6-12
12-18
18-24
Wednesday
0-6
6-12
12-18
18-24
Thursday
0-6
6-12
12-18
18-24
Friday
0-6
6-12
12-18
18-24
Saturday
0-6
6-12
12-18
18-24
Sunday
0-6
6-12
12-18
18-24
On mondays between 0:00 and 6:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 6:00 and 12:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 12:00 and 18:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 18:00 and 24:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On tuesdays between 0:00 and 6:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 1.4% higher than their respective average weekly price.
On tuesdays between 6:00 and 12:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 1.5% higher than their respective average weekly price.
On tuesdays between 12:00 and 18:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On tuesdays between 18:00 and 24:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 0:00 and 6:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 6:00 and 12:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 12:00 and 18:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 18:00 and 24:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
Purchases can be expensive here.
On thursdays between 0:00 and 6:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 3.1% higher than their respective average weekly price.
This is the best time to buy.
On thursdays between 6:00 and 12:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 2.7% lower than their respective average weekly price.
On thursdays between 12:00 and 18:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On thursdays between 18:00 and 24:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On fridays between 0:00 and 6:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 1.7% higher than their respective average weekly price.
On fridays between 6:00 and 12:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 2.5% higher than their respective average weekly price.
On fridays between 12:00 and 18:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On fridays between 18:00 and 24:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 1.3% higher than their respective average weekly price.
On saturdays between 0:00 and 6:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 1.3% lower than their respective average weekly price.
On saturdays between 6:00 and 12:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On saturdays between 12:00 and 18:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 2.2% lower than their respective average weekly price.
On saturdays between 18:00 and 24:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 1.5% lower than their respective average weekly price.
On sundays between 0:00 and 6:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 6:00 and 12:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 1.9% lower than their respective average weekly price.
On sundays between 12:00 and 18:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 18:00 and 24:00, the prices of products from the Tool Holders product range in the „Business, Industry & Science“ product group are on average around 1.3% lower than their respective average weekly price.
-3.2%
+3.2%
100%
Average price

Tool Holders

Haimer 78.1/2Z0.1/8Z.2 Shrink Extension from 1/2" to 1/8" Diameter without Set Screw (Telescope) with Slit from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 78.1/2Z0.1/8Z.2 Shrink Extension from 1/2" to 1/8" Diameter without Set Screw (Telescope) with Slit
from Haimer
found at Amazon Marketplace
304.06 £
Shipping costs: 5.11 £
Llambrich 3/4" Straight Shank Shank to Jacobs Taper 4 Arbor from Llambrich
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Llambrich 3/4" Straight Shank Shank to Jacobs Taper 4 Arbor
found at Amazon Marketplace
24.10 £
Shipping costs: 4.95 £
Lyndex 340-052 3J Square Collet, 13/16" Opening Size, 3.75" Length, 2.20" Top Diameter, 2" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 340-052 3J Square Collet, 13/16" Opening Size, 3.75" Length, 2.20" Top Diameter, 2" Bottom Diameter
found at Amazon Marketplace
87.25 £
Shipping costs: 3.51 £
Lyndex 520-019 5C Round Collet, 19mm Opening Size, 3.27" Length, 1.485" Top Diameter, 1.25" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 520-019 5C Round Collet, 19mm Opening Size, 3.27" Length, 1.485" Top Diameter, 1.25" Bottom Diameter
found at Amazon Marketplace
37.42 £
Shipping costs: 3.51 £
Lyndex 163-052 16C Hex Collet, 13/16" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 163-052 16C Hex Collet, 13/16" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter
found at Amazon Marketplace
79.74 £
Shipping costs: 3.51 £
Haimer 40.550.1Z Adapter for Inserted Tooth Milling Cutters, 1" Diameter, Version MAS/BT 40 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.550.1Z Adapter for Inserted Tooth Milling Cutters, 1" Diameter, Version MAS/BT 40
from Haimer
found at Amazon Marketplace
236.15 £
Shipping costs: 11.48 £
Hardinge TD25S Square Smooth Swiss Carbide Guide Bushing, 1/8" Hole Size from Hardinge
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Hardinge TD25S Square Smooth Swiss Carbide Guide Bushing, 1/8" Hole Size
found at Amazon Marketplace
138.88 £
Shipping costs: 4.15 £
Lyndex E40-032 ER40 Chromium Molybdenum Steel Standard Collet, 1/2" Opening Size, 41.2mm Top Diameter, 31.2mm Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex E40-032 ER40 Chromium Molybdenum Steel Standard Collet, 1/2" Opening Size, 41.2mm Top Diameter, 31.2mm Bottom Diameter
found at Amazon Marketplace
44.51 £
Shipping costs: 3.51 £
Haimer 86.200.01 Shrink Fit Brush, 3 mm, 1/8" from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 86.200.01 Shrink Fit Brush, 3 mm, 1/8"
from Haimer
found at Amazon Marketplace
5.06 £
Shipping costs: 3.92 £
SCHUNK 0161101 Steel Hard Stepped Block Jaws, Angled, 22 mm x 60 mm x 94 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0161101 Steel Hard Stepped Block Jaws, Angled, 22 mm x 60 mm x 94 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
739.82 £
Shipping costs: 11.48 £
Pro Series by HHIP 3901-1216 Pro MT2 Morse Taper End Mill Holder-Drawbar End, 1/2" from Pro Series HHIP
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Pro Series by HHIP 3901-1216 Pro MT2 Morse Taper End Mill Holder-Drawbar End, 1/2"
found at Amazon Marketplace
64.25 £
Shipping costs: 4.63 £
Sandvik Coromant 870-1900-19LX1-10 CoroDrill 870 Exchangeable Tip Drill, 0.748" Drill Tip Minimum, 0.787" Drill Tip Maximum, 8.779" Functional Length, 8.11" Body Length from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Sandvik Coromant 870-1900-19LX1-10 CoroDrill 870 Exchangeable Tip Drill, 0.748" Drill Tip Minimum, 0.787" Drill Tip Maximum, 8.779" Functional Length, 8.11" Body Length
found at Amazon Marketplace
733.63 £
Shipping costs: 5.62 £
Haimer 40.350.40.KKB Adaptor for Inserted Tooth Milling Cutters, 40 mm Diameter, Short, Version SK40 with Coolant Tube from HAIMER
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.350.40.KKB Adaptor for Inserted Tooth Milling Cutters, 40 mm Diameter, Short, Version SK40 with Coolant Tube
from HAIMER
found at Amazon Marketplace
167.51 £
Shipping costs: 0.00 £
Ceratizit 11483597 SX4 Series Steel Monoblock Holder, Right Side, 25 mm Height, 150 mm Overall Length from Ceratizit
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Ceratizit 11483597 SX4 Series Steel Monoblock Holder, Right Side, 25 mm Height, 150 mm Overall Length
found at Amazon Marketplace
24.46 £
Shipping costs: 5.43 £
Haimer 80.501.07.0 Quick Change Inserts, 01Type from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 80.501.07.0 Quick Change Inserts, 01Type
from Haimer
found at Amazon Marketplace
85.19 £
Shipping costs: 83.19 £
SCHUNK 0138143 Steel Hard Claw Jaws for O.D. Clamping, 1.5 mm x 60 Degree, 14 mm Groove Width, 40 mm x 53 mm x 25 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0138143 Steel Hard Claw Jaws for O.D. Clamping, 1.5 mm x 60 Degree, 14 mm Groove Width, 40 mm x 53 mm x 25 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
528.98 £
Shipping costs: 11.48 £
Haimer 40.750.11/2Z Adaptor for Inserted Tooth Milling Cutters, 11/2" Diameter, Short, Version CAT 40 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.750.11/2Z Adaptor for Inserted Tooth Milling Cutters, 11/2" Diameter, Short, Version CAT 40
from Haimer
found at Amazon Marketplace
346.12 £
Shipping costs: 11.48 £
Haimer 81.323.16 Collet for Power Collet Chuck ER 32, 16 mm from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 81.323.16 Collet for Power Collet Chuck ER 32, 16 mm
from Haimer
found at Amazon Marketplace
230.09 £
Shipping costs: 83.19 £
SCHUNK 0206486 20.0 mm TENDO SDF-E Compact CAT 40 Hydraulic Expansion Toolholder, 64.5 mm Gage Length from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0206486 20.0 mm TENDO SDF-E Compact CAT 40 Hydraulic Expansion Toolholder, 64.5 mm Gage Length
from Schunk
found at Amazon Marketplace
274.37 £
Shipping costs: 8.13 £
Centaur 101012 Torque Control Tap Adapter, CWES #1, 12 Hand Tap Size, 1 QC #12 Tap from Centaur
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Centaur 101012 Torque Control Tap Adapter, CWES #1, 12 Hand Tap Size, 1 QC #12 Tap
from Centaur
found at Amazon Marketplace
104.40 £
Shipping costs: 5.11 £
SCHUNK 0139163 Steel Hard Claw Jaws for O.D. Clamping, 12 mm Groove Width, 40 mm x 50 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0139163 Steel Hard Claw Jaws for O.D. Clamping, 12 mm Groove Width, 40 mm x 50 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
671.78 £
Shipping costs: 11.48 £
Lyndex 520-006 5C Round Collet, 6mm Opening Size, 3.27" Length, 1.485" Top Diameter, 1.25" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 520-006 5C Round Collet, 6mm Opening Size, 3.27" Length, 1.485" Top Diameter, 1.25" Bottom Diameter
found at Amazon Marketplace
37.59 £
Shipping costs: 4.41 £
YG-1 PK017 Standard Stub Arbor, CAT40-STUB1 1/4-4.00 from YG-1
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
YG-1 PK017 Standard Stub Arbor, CAT40-STUB1 1/4-4.00
from YG-1
found at Amazon Marketplace
212.27 £
Shipping costs: 13.08 £
HHIP 3900-2911 C Type Tool Holder Bushing, 1-1/4" OD x 3/8" ID from HHIP
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
HHIP 3900-2911 C Type Tool Holder Bushing, 1-1/4" OD x 3/8" ID
from HHIP
found at Amazon Marketplace
49.19 £
Shipping costs: 5.04 £
Centaur BTR3000 BT30/MRT#0 Rigid Quick Change Tap Holder, 0-1/4 Capacity from Centaur
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Centaur BTR3000 BT30/MRT#0 Rigid Quick Change Tap Holder, 0-1/4 Capacity
from Centaur
found at Amazon Marketplace
265.93 £
Shipping costs: 8.30 £
SCHUNK 0203983 10.0 mm TENDO SDF CAT 50 Hydraulic Expansion Toolholder, 81.0 mm Gage Length from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0203983 10.0 mm TENDO SDF CAT 50 Hydraulic Expansion Toolholder, 81.0 mm Gage Length
from Schunk
found at Amazon Marketplace
533.99 £
Shipping costs: 11.48 £
Haimer 80.106.00 Cart from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 80.106.00 Cart
from Haimer
found at Amazon Marketplace
1,044.30 £
Shipping costs: 83.19 £
Haimer CC6.000.08 Weldon Tool Holder, Capto C6, A=55 mm, 8 mm Diameter from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer CC6.000.08 Weldon Tool Holder, Capto C6, A=55 mm, 8 mm Diameter
from Haimer
found at Amazon Marketplace
642.30 £
Shipping costs: 11.48 £
Sandvik Coromant 870-2700-27LX125-5 CoroDrill 870 Exchangeable Tip Drill, 1.063" Drill Tip Minimum, 1.102" Drill Tip Maximum, 6.727" Functional Length, 5.826" Body Length from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Sandvik Coromant 870-2700-27LX125-5 CoroDrill 870 Exchangeable Tip Drill, 1.063" Drill Tip Minimum, 1.102" Drill Tip Maximum, 6.727" Functional Length, 5.826" Body Length
found at Amazon Marketplace
684.16 £
Shipping costs: 6.96 £
Lyndex 160-058 16C Round Collet, 29/32" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 160-058 16C Round Collet, 29/32" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter
found at Amazon Marketplace
70.68 £
Shipping costs: 3.51 £
Haimer 88.500.40 Retention Knob, CAT 40 ANSI with Bore for MAZAK from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 88.500.40 Retention Knob, CAT 40 ANSI with Bore for MAZAK
from Haimer
found at Amazon Marketplace
57.49 £
Shipping costs: 83.19 £
Haimer F80M.050.1Z Adaptor for Inserted Tooth Milling Cutters, A=67 mm, 1" Diameter from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer F80M.050.1Z Adaptor for Inserted Tooth Milling Cutters, A=67 mm, 1" Diameter
from Haimer
found at Amazon Marketplace
504.85 £
Shipping costs: 11.48 £
Haimer A10.000.25 Weldon Tool Holder, 25 mm Diameter, Short, Version HSK-A100 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A10.000.25 Weldon Tool Holder, 25 mm Diameter, Short, Version HSK-A100
from Haimer
found at Amazon Marketplace
358.20 £
Shipping costs: 11.48 £
SCHUNK 0146131 T-Nut, M12 Screw Size, 14 mm x 20.5 mm from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0146131 T-Nut, M12 Screw Size, 14 mm x 20.5 mm
from Schunk
found at Amazon Marketplace
68.85 £
Shipping costs: 11.48 £
Haimer 81.163.02 Collet for Power Collet Chuck, ER 16, 2 mm from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 81.163.02 Collet for Power Collet Chuck, ER 16, 2 mm
from Haimer
found at Amazon Marketplace
189.82 £
Shipping costs: 83.19 £
Haimer 40.640.7/8Z.4 Shrink Chuck, 7/8" Diameter, Version BT 40, A=90 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.640.7/8Z.4 Shrink Chuck, 7/8" Diameter, Version BT 40, A=90
from Haimer
found at Amazon Marketplace
270.57 £
Shipping costs: 11.48 £
Lyndex 500-030 5C Round Collet, 15/32" Opening Size, 3.27" Length, 1.485" Top Diameter, 1.25" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 500-030 5C Round Collet, 15/32" Opening Size, 3.27" Length, 1.485" Top Diameter, 1.25" Bottom Diameter
found at Amazon Marketplace
27.27 £
Shipping costs: 4.47 £
Haimer A10.042.40 Combination Shell End Mill Adapter, 40 mm Diameter, Oversized, Version HSK-A100 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A10.042.40 Combination Shell End Mill Adapter, 40 mm Diameter, Oversized, Version HSK-A100
from Haimer
found at Amazon Marketplace
653.12 £
Shipping costs: 11.48 £
SCM CAT50 Size 1 Tension and Compression Tapping Chuck 32400/50CAT from SCM
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCM CAT50 Size 1 Tension and Compression Tapping Chuck 32400/50CAT
from SCM
found at Amazon Marketplace
278.64 £
Shipping costs: 15.94 £
Haimer 40.630.03 Adapter with Morse Taper and Drawbar Thread, MK 3 MAS/BT 40 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.630.03 Adapter with Morse Taper and Drawbar Thread, MK 3 MAS/BT 40
from Haimer
found at Amazon Marketplace
217.97 £
Shipping costs: 11.48 £
Haimer 80.105.14.2.05 Shrink and Cooling Sleeve for Mini Shrink8, Extra Slim5 Standard for Cooling Body 6-8 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 80.105.14.2.05 Shrink and Cooling Sleeve for Mini Shrink8, Extra Slim5 Standard for Cooling Body 6-8
from Haimer
found at Amazon Marketplace
159.61 £
Shipping costs: 83.19 £
Lyndex 164-044 16C Square Collet, 11/16" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 164-044 16C Square Collet, 11/16" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter
found at Amazon Marketplace
85.80 £
Shipping costs: 3.51 £
Lyndex NT10-032 Positive Drive Tap Collet, 2 System, 1/2" Tap Size, 1.98" Top Diameter, 1.22" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex NT10-032 Positive Drive Tap Collet, 2 System, 1/2" Tap Size, 1.98" Top Diameter, 1.22" Bottom Diameter
found at Amazon Marketplace
53.70 £
Shipping costs: 3.68 £
Lyndex C5001-1250 CAT50 Shell Mill Holder, 5/8"-18 Arbor, 2.882" Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex C5001-1250 CAT50 Shell Mill Holder, 5/8"-18 Arbor, 2.882" Diameter
found at Amazon Marketplace
190.00 £
Shipping costs: 3.51 £
Lyndex C40S6-0750 CAT40 Taper Shank Steel Stub End Mill Holder, 1.89" Nose Diameter, 3/4" Hole Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex C40S6-0750 CAT40 Taper Shank Steel Stub End Mill Holder, 1.89" Nose Diameter, 3/4" Hole Diameter
found at Amazon Marketplace
127.59 £
Shipping costs: 3.51 £
Haimer 81.253.10 Collet for Power Collet Chuck, ER 25, 10 mm from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 81.253.10 Collet for Power Collet Chuck, ER 25, 10 mm
from Haimer
found at Amazon Marketplace
195.77 £
Shipping costs: 83.19 £
Lyndex 018-040 180DA Collet, 5/8" Opening Size, 1.637" Length, 1.035" Top Diameter, 0.873" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 018-040 180DA Collet, 5/8" Opening Size, 1.637" Length, 1.035" Top Diameter, 0.873" Bottom Diameter
found at Amazon Marketplace
16.26 £
Shipping costs: 3.51 £
Pro Series by HHIP 3900-5556 ER-32 Coolant Thru Spring Collet, 23/32" from Pro Series HHIP
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Pro Series by HHIP 3900-5556 ER-32 Coolant Thru Spring Collet, 23/32"
found at Amazon Marketplace
23.36 £
Shipping costs: 3.68 £
Lyndex-Nikken HSK100A-NPU13C-145 Series HSK Integral Keyless Drill Chuck, HSK100A Taper, 3/32-1/2" Capacity, 6.42" Length from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex-Nikken HSK100A-NPU13C-145 Series HSK Integral Keyless Drill Chuck, HSK100A Taper, 3/32-1/2" Capacity, 6.42" Length
found at Amazon Marketplace
850.45 £
Shipping costs: 16.43 £
Lyndex 018-EXT-S 180DA Series Straight Shank Collet Chuck Extension, 3/64" - 3/4" Collet Range, 1-1/4" Diameter x 7.40" Length from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 018-EXT-S 180DA Series Straight Shank Collet Chuck Extension, 3/64" - 3/4" Collet Range, 1-1/4" Diameter x 7.40" Length
found at Amazon Marketplace
85.29 £
Shipping costs: 5.51 £
Haimer 40.500.10 Weldon Tool Holder, 10 mm Diameter, Short, Version MAS/BT 40 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.500.10 Weldon Tool Holder, 10 mm Diameter, Short, Version MAS/BT 40
from Haimer
found at Amazon Marketplace
102.50 £
Shipping costs: 0.00 £
Haimer 80.152.06.2 Power Shrink Chuck, Stop Disc 6-12 Short for Ultra Short from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 80.152.06.2 Power Shrink Chuck, Stop Disc 6-12 Short for Ultra Short
from Haimer
found at Amazon Marketplace
218.92 £
Shipping costs: 4.07 £
Bahco 1475KXL7PAW Tool Trolleys for Construction from Bahco
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Bahco 1475KXL7PAW Tool Trolleys for Construction
from Bahco
found at Amazon Marketplace
1,569.30 £2,038.06 £
Shipping costs: 14.05 £
- 23%
Haimer 79.200.63 Adapter for Sawblade with 63 mm Diameter from HAIMER
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 79.200.63 Adapter for Sawblade with 63 mm Diameter
from HAIMER
found at Amazon Marketplace
183.71 £
Shipping costs: 6.70 £
Haimer 78.501.16.1 Shrink Extension from 50 to 16 without Set Screw (Telescope), 300 mm from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 78.501.16.1 Shrink Extension from 50 to 16 without Set Screw (Telescope), 300 mm
from Haimer
found at Amazon Marketplace
550.83 £
Shipping costs: 15.06 £
Centaur 1006 Torque Control Tap Adapter, CWES0, 6 Hand Tap Size, 0 QC #6 Tap from Centaur
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Centaur 1006 Torque Control Tap Adapter, CWES0, 6 Hand Tap Size, 0 QC #6 Tap
from Centaur
found at Amazon Marketplace
105.29 £
Shipping costs: 5.11 £
Lyndex 160-059 16C Round Collet, 59/64" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 160-059 16C Round Collet, 59/64" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter
found at Amazon Marketplace
70.68 £
Shipping costs: 3.51 £
Sandvik Coromant C3-PSSNR-22032-12 T-Max P Cutting Unit for Turning, SNMG 12 04 08 Master Insert, Cx-PSSNR/L Tool, Right Hand, 32 mm Functional Length, 22 mm Functional Width, 22 mm Shank Diameter from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Sandvik Coromant C3-PSSNR-22032-12 T-Max P Cutting Unit for Turning, SNMG 12 04 08 Master Insert, Cx-PSSNR/L Tool, Right Hand, 32 mm Functional Length, 22 mm Functional Width, 22 mm Shank Diameter
found at Amazon Marketplace
248.46 £
Shipping costs: 4.24 £
Haimer 40.550.22.KKB Adapter for Inserted Tooth Milling Cutters, 22 mm Diameter, Short, Version MAS/BT 40 with Coolant Bores at Face from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.550.22.KKB Adapter for Inserted Tooth Milling Cutters, 22 mm Diameter, Short, Version MAS/BT 40 with Coolant Bores at Face
from Haimer
found at Amazon Marketplace
115.00 £
Shipping costs: 0.00 £
Centaur 310937 Torque Control Tap Adapter, CWES #3, 15/16" Pipe Tap Size from Centaur
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Centaur 310937 Torque Control Tap Adapter, CWES #3, 15/16" Pipe Tap Size
from Centaur
found at Amazon Marketplace
241.58 £
Shipping costs: 8.30 £
Haimer 80.152.03 Stop Disc, Type 53-5 V2008 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 80.152.03 Stop Disc, Type 53-5 V2008
from Haimer
found at Amazon Marketplace
154.94 £
Shipping costs: 4.07 £
Haimer A63.051.3/4Z Adapter for Inserted Tooth Milling Cutters, 22 mm Diameter, Long, Version HSK-A63 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A63.051.3/4Z Adapter for Inserted Tooth Milling Cutters, 22 mm Diameter, Long, Version HSK-A63
from Haimer
found at Amazon Marketplace
377.55 £
Shipping costs: 11.48 £
Haimer 50.340.32 Combination Shell End Mill Adapter, 32 mm Diameter, Short, Version SK 50 from HAIMER
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 50.340.32 Combination Shell End Mill Adapter, 32 mm Diameter, Short, Version SK 50
from HAIMER
found at Amazon Marketplace
213.76 £
Shipping costs: 0.00 £
Morse Cutting Tools 30507 Tap Wrenches, 17 Size, 1" to 2-1/2" Tap Capacity from Morse Cutting Tools
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Morse Cutting Tools 30507 Tap Wrenches, 17 Size, 1" to 2-1/2" Tap Capacity
found at Amazon Marketplace
358.14 £
Shipping costs: 11.44 £
SCHUNK 0155104 Steel Hard Stepped Top Jaws, 18 mm Groove Width, 45 mm x 82 mm x 130 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0155104 Steel Hard Stepped Top Jaws, 18 mm Groove Width, 45 mm x 82 mm x 130 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
778.89 £
Shipping costs: 11.48 £
SCHUNK 0203663 10.0 mm TENDO SDF-KS CAT 40 Hydraulic Expansion Toolholder, 101.6 mm Gage Length from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0203663 10.0 mm TENDO SDF-KS CAT 40 Hydraulic Expansion Toolholder, 101.6 mm Gage Length
from Schunk
found at Amazon Marketplace
454.93 £
Shipping costs: 11.48 £
SCHUNK 0121103 Steel Hard Stepped Top Jaws, 1/16" x 90 Degree, 17 mm Groove Width, 35 mm x 44 mm x 64.7 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0121103 Steel Hard Stepped Top Jaws, 1/16" x 90 Degree, 17 mm Groove Width, 35 mm x 44 mm x 64.7 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
573.35 £
Shipping costs: 11.48 £
Haimer 81.163.1/8Z Power Collet, ER 16, 1/8" from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 81.163.1/8Z Power Collet, ER 16, 1/8"
from Haimer
found at Amazon Marketplace
190.11 £
Shipping costs: 83.19 £
Haimer A63.022.25 Collet Chuck, ER 25, Oversized, Version HSK-A63 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A63.022.25 Collet Chuck, ER 25, Oversized, Version HSK-A63
from Haimer
found at Amazon Marketplace
210.01 £
Shipping costs: 0.00 £
SCHUNK 0138126 Steel Hard Claw Jaws for O.D. Clamping, 1.5 mm x 60 Degree, 18 mm Groove Width, 50 mm x 65 mm x 25 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0138126 Steel Hard Claw Jaws for O.D. Clamping, 1.5 mm x 60 Degree, 18 mm Groove Width, 50 mm x 65 mm x 25 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
713.12 £
Shipping costs: 11.48 £
SCHUNK 0155102 Steel Hard Stepped Top Jaws, 12 mm Groove Width, 30 mm x 55 mm x 90 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0155102 Steel Hard Stepped Top Jaws, 12 mm Groove Width, 30 mm x 55 mm x 90 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
399.74 £
Shipping costs: 11.48 £
Haimer 40.550.16 Adapter for Inserted Tooth Milling Cutters, 16 mm Diameter, Short, Version MAS/BT 40 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.550.16 Adapter for Inserted Tooth Milling Cutters, 16 mm Diameter, Short, Version MAS/BT 40
from Haimer
found at Amazon Marketplace
236.15 £
Shipping costs: 11.48 £
Lyndex NT05-024 Positive Drive Tap Collet, 1 System, 3/8" Tap Size, 1.18" Top Diameter, 0.75" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex NT05-024 Positive Drive Tap Collet, 1 System, 3/8" Tap Size, 1.18" Top Diameter, 0.75" Bottom Diameter
found at Amazon Marketplace
34.58 £
Shipping costs: 3.68 £
Lyndex-Nikken E16-006 Series ER16 Collet, 27 mm Length, Chromium Molybdenum Alloy Material, 3/32" Size from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex-Nikken E16-006 Series ER16 Collet, 27 mm Length, Chromium Molybdenum Alloy Material, 3/32" Size
found at Amazon Marketplace
37.28 £
Shipping costs: 3.61 £
SCHUNK 0160650 Hardened Base Jaws, Straight, 14 mm Groove Width, 40 mm x 47 mm x 95 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0160650 Hardened Base Jaws, Straight, 14 mm Groove Width, 40 mm x 47 mm x 95 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
1,417.10 £
Shipping costs: 11.48 £
SCM 19/1 4097C Size 1 Torque Control Quick Change Tap Adapter 1/8" NPT, Alloy Tool Steel from SCM
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCM 19/1 4097C Size 1 Torque Control Quick Change Tap Adapter 1/8" NPT, Alloy Tool Steel
from SCM
found at Amazon Marketplace
75.89 £
Shipping costs: 4.01 £
Lyndex 830-028 R8 Taper Shank Steel End Mill Holder, 1.38" Nose Diameter, 7/16" Hole Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 830-028 R8 Taper Shank Steel End Mill Holder, 1.38" Nose Diameter, 7/16" Hole Diameter
found at Amazon Marketplace
62.49 £
Shipping costs: 5.51 £
Haimer 40.720.25 Collet Chuck, ER25 Short, Version CAT 40 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.720.25 Collet Chuck, ER25 Short, Version CAT 40
from Haimer
found at Amazon Marketplace
183.70 £
Shipping costs: 11.48 £
Centaur CTR4001 V40 Rigid Quick Change Tap Holder, 0-9/16 Capacity from Centaur
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Centaur CTR4001 V40 Rigid Quick Change Tap Holder, 0-9/16 Capacity
from Centaur
found at Amazon Marketplace
255.40 £
Shipping costs: 8.30 £
SCHUNK 0204448 10.0 mm TENDO SDF-LS JIS-BT 40 Hydraulic Expansion Toolholder, 140.0 mm Gage Length from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0204448 10.0 mm TENDO SDF-LS JIS-BT 40 Hydraulic Expansion Toolholder, 140.0 mm Gage Length
from Schunk
found at Amazon Marketplace
789.05 £
Shipping costs: 11.48 £
Haimer 50.722.25 Collet Chuck, ER 25, Oversized, Version CAT 50 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 50.722.25 Collet Chuck, ER 25, Oversized, Version CAT 50
from Haimer
found at Amazon Marketplace
474.02 £
Shipping costs: 11.48 £
Haimer A63.030.16 Whistle Notch, 16 mm Diameter, Short, Version HSK-A63 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A63.030.16 Whistle Notch, 16 mm Diameter, Short, Version HSK-A63
from Haimer
found at Amazon Marketplace
307.00 £
Shipping costs: 11.48 £
Sandvik Coromant C5-131-00070-1000 Capto to cylindrical shank adaptor from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Sandvik Coromant C5-131-00070-1000 Capto to cylindrical shank adaptor
found at Amazon Marketplace
386.40 £
Shipping costs: 7.45 £
Haimer 40.300.06 Weldon Tool Holder, 6 mm Diameter, Short, Version SK 40 from HAIMER
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.300.06 Weldon Tool Holder, 6 mm Diameter, Short, Version SK 40
from HAIMER
found at Amazon Marketplace
199.22 £
Shipping costs: 11.48 £
Haimer A63.000.18 Weldon Tool Holder, 18 mm Diameter, Short, Version HSK-A63 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A63.000.18 Weldon Tool Holder, 18 mm Diameter, Short, Version HSK-A63
from Haimer
found at Amazon Marketplace
292.73 £
Shipping costs: 11.48 £
Haimer 30.440.10 Shrink Chuck, 10 mm Diameter, Version SK30, A=80 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 30.440.10 Shrink Chuck, 10 mm Diameter, Version SK30, A=80
from Haimer
found at Amazon Marketplace
290.92 £
Shipping costs: 11.48 £
Haimer 81.320.18.5.CD Coolant Disk for ER32, 18 mm-18.5 mm from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 81.320.18.5.CD Coolant Disk for ER32, 18 mm-18.5 mm
from Haimer
found at Amazon Marketplace
47.59 £
Shipping costs: 83.19 £
SCHUNK 0157121 Hardened Base Jaws, Angled, 20 mm Groove Width, 22 mm x 32 mm x 110 mm (Pack of 3) from Schunk
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
SCHUNK 0157121 Hardened Base Jaws, Angled, 20 mm Groove Width, 22 mm x 32 mm x 110 mm (Pack of 3)
from Schunk
found at Amazon Marketplace
550.24 £
Shipping costs: 11.48 £
Lyndex 530-052 5C Hex Collet, 13/16" Opening Size, 3.27" Length, 1.485" Top Diameter, 1.25" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 530-052 5C Hex Collet, 13/16" Opening Size, 3.27" Length, 1.485" Top Diameter, 1.25" Bottom Diameter
found at Amazon Marketplace
46.07 £
Shipping costs: 3.51 £
TGSEA 3" Carbon Steel 3-Jaw Gear Puller Car Bearing Removal Tool Kit for Slide Gears, Pulley, and Flywheel from TGSEA
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
TGSEA 3" Carbon Steel 3-Jaw Gear Puller Car Bearing Removal Tool Kit for Slide Gears, Pulley, and Flywheel
from TGSEA
found at Amazon Marketplace
12.99 £
Shipping costs: 0.00 £
Haimer A63.002.32 Weldon Tool Holder, 32 mm Diameter, Oversized, Version HSK-A63 from HAIMER
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A63.002.32 Weldon Tool Holder, 32 mm Diameter, Oversized, Version HSK-A63
from HAIMER
found at Amazon Marketplace
431.53 £
Shipping costs: 11.48 £
Haimer 40.446.06 Shrink Chuck, 6 mm Diameter, ZG 200 SK 40 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 40.446.06 Shrink Chuck, 6 mm Diameter, ZG 200 SK 40
from Haimer
found at Amazon Marketplace
440.57 £
Shipping costs: 11.48 £
Haimer 88.500.40.1 Retention Knob, CAT 40 ANSI with Bore, Similar to MAZAK from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer 88.500.40.1 Retention Knob, CAT 40 ANSI with Bore, Similar to MAZAK
from Haimer
found at Amazon Marketplace
68.61 £
Shipping costs: 83.19 £
Lyndex 160-035 16C Round Collet, 35/64" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 160-035 16C Round Collet, 35/64" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter
found at Amazon Marketplace
70.60 £
Shipping costs: 3.51 £
Haimer A10.050.32 Adaptor for Inserted Tooth Milling Cutters, 32 mm Diameter, Short, Version HSK-A100 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A10.050.32 Adaptor for Inserted Tooth Milling Cutters, 32 mm Diameter, Short, Version HSK-A100
from Haimer
found at Amazon Marketplace
490.56 £
Shipping costs: 11.48 £
Centaur BF2 2531 Quick Change Tap Adapter with ER 25, RD25 Collet Series from Centaur
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Centaur BF2 2531 Quick Change Tap Adapter with ER 25, RD25 Collet Series
from Centaur
found at Amazon Marketplace
95.30 £
Shipping costs: 5.11 £
1P C32-2D31.5-67 WC06 U drill / indexable drill / 31.5mm-2D with 2PCS WCMX06T308 from CCC.TT
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
1P C32-2D31.5-67 WC06 U drill / indexable drill / 31.5mm-2D with 2PCS WCMX06T308
from CCC.TT
found at Amazon Marketplace
40.80 £
Shipping costs: 0.00 £
Lyndex 160-027 16C Round Collet, 27/64" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter from Lyndex-Nikken
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Lyndex 160-027 16C Round Collet, 27/64" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter
found at Amazon Marketplace
70.60 £
Shipping costs: 3.51 £
Chicago Latrobe Drill Bit Case, 21 Bit Capacity, for Inch Sizes 1/16" to 3/8" in 1/64" Increments from CHICAGO LATROBE
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Chicago Latrobe Drill Bit Case, 21 Bit Capacity, for Inch Sizes 1/16" to 3/8" in 1/64" Increments
found at Amazon Marketplace
6.31 £
Shipping costs: 3.95 £
Haimer A63.177.12 Mini Shrink, 12 mm Diameter, ZG120 HSK-A63 from Haimer
found at Amazon Marketplace
last verified on 2019-10-19 at 09:01; the price may have changed since.
Haimer A63.177.12 Mini Shrink, 12 mm Diameter, ZG120 HSK-A63
from Haimer
found at Amazon Marketplace
394.96 £
Shipping costs: 11.48 £