"Thread Mills" in the category Business, Industry & Science

Welcome to Wunderstore, Britains's largest product search site with price comparison. You are currently in the Business, Industry & Science category in the "Thread Mills" department. With Wunderstore, you can browse more than 100 online shops for offers. In this way, you'll find almost every product from the Business, Industry & Science: Thread Mills section on our site that is currently available to buy online. And the best thing: not only will we show you which online shop you can currently buy the particular product you're looking for from, but we'll also let slip where you can buy that product at the best price!

To conduct a more targeted search, you can restrict the product selection to specific sub-sections such as "Helical Flute", "Straight Flute" or "Thread Forming". You can also run a specific targeted search for products from particular brands with us. Use the search field or the filter at the side for this. In this way, you can restrict the product selection to Dormer Pramet, Sandvik Coromant, Micro 100 or Hazet, for example. You can also use the filter at the side to search for products in specific colours or within certain price segments. And if you're on the hunt for a bargain, use the "Sale Filter" to find currently reduced items. In any case, we hope that we can help you with your search for good, well-priced offers on the internet using our price comparison tool.

Thread Mills: How you can benefit from comparing prices

Price trend for the Thread Mills product range in the Business, Industry & Science product group

Online shops constantly optimise their prices. Some prices are updated several times a day and adapted in line with competitors’ offers. Our price trend shows you the trend development of prices for products in the Business, Industry & Science/Thread Mills product range over the last few weeks and months.

We also, however, tell you when you can typically pick up products from the Business, Industry & Science/Thread Mills product range at a particularly attractive price. A good time is, for example, on thursdays. For more details, see the price analysis graphs below.

By comparing prices, you can save a lot of money, in particular on big-ticket items. To make this extra easy for you, we show you for each product the online shop in which we found the current best offer and how much you can save in absolute and percentage terms with a price comparison.
Show details: When are products in the Thread Mills product range in the Business, Industry & Science product group particularly cheap?

Have you already thought about the right time to purchase of products in the Thread Mills product range in the Business, Industry & Science product group? We tell you the days of the week and specific times when the prices are particularly attractive.

Thursday is the cheapest day of the week
mon
tue
wed
thu
fri
sat
sun
On mondays, products from the Thread Mills product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 2.7% lower than the average weekly price.
On tuesdays, products from the Thread Mills product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 1.2% lower than the average weekly price.
On wednesdays, products from the Thread Mills product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 1.2% higher than the average weekly price.
On thursdays, products from the Thread Mills product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 9.8% lower than the average weekly price.
On fridays, products from the Thread Mills product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 3.2% higher than the average weekly price.
On saturdays, products from the Thread Mills product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 3.4% higher than the average weekly price.
On sundays, products from the Thread Mills product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 1.3% lower than the average weekly price.
-8.9%
+8.9%
100%
Average price
Are you already doing something between 22:00 and 23:00?
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 0:00 and 1:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 1:00 and 2:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 2:00 and 3:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 3:00 and 4:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 4:00 and 5:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 5:00 and 6:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 6:00 and 7:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 7:00 and 8:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 8:00 and 9:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 9:00 and 10:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 10:00 and 11:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 11:00 and 12:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 12:00 and 13:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 13:00 and 14:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 14:00 and 15:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 15:00 and 16:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 16:00 and 17:00, they are on average around 1.3% higher than the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 17:00 and 18:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 18:00 and 19:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 19:00 and 20:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 20:00 and 21:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 21:00 and 22:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 22:00 and 23:00, they are, however, largely in line with the daily average.
The prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 23:00 and 24:00, they are, however, largely in line with the daily average.
-1.3%
+1.3%
100%
Average price
It is probably not a bad idea to shop online for Thread Mills on thursday between 18:00 and 24:00.
Monday
0-6
6-12
12-18
18-24
Tuesday
0-6
6-12
12-18
18-24
Wednesday
0-6
6-12
12-18
18-24
Thursday
0-6
6-12
12-18
18-24
Friday
0-6
6-12
12-18
18-24
Saturday
0-6
6-12
12-18
18-24
Sunday
0-6
6-12
12-18
18-24
On mondays between 0:00 and 6:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 6:00 and 12:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 12:00 and 18:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On mondays between 18:00 and 24:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
Purchases can be expensive here.
On tuesdays between 0:00 and 6:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 5% higher than their respective average weekly price.
On tuesdays between 6:00 and 12:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 4% higher than their respective average weekly price.
On tuesdays between 12:00 and 18:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 3.9% higher than their respective average weekly price.
On tuesdays between 18:00 and 24:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 0:00 and 6:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 6:00 and 12:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 12:00 and 18:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 18:00 and 24:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 1.2% higher than their respective average weekly price.
On thursdays between 0:00 and 6:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 5.7% lower than their respective average weekly price.
On thursdays between 6:00 and 12:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 8.8% lower than their respective average weekly price.
On thursdays between 12:00 and 18:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
This is the best time to buy.
On thursdays between 18:00 and 24:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 15.9% lower than their respective average weekly price.
On fridays between 0:00 and 6:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 4.4% lower than their respective average weekly price.
On fridays between 6:00 and 12:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 3.3% lower than their respective average weekly price.
On fridays between 12:00 and 18:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 3.3% higher than their respective average weekly price.
On fridays between 18:00 and 24:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 2.8% lower than their respective average weekly price.
On saturdays between 0:00 and 6:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 4% lower than their respective average weekly price.
On saturdays between 6:00 and 12:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On saturdays between 12:00 and 18:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 2.2% lower than their respective average weekly price.
On saturdays between 18:00 and 24:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 0:00 and 6:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 6:00 and 12:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 12:00 and 18:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average around 1.1% higher than their respective average weekly price.
On sundays between 18:00 and 24:00, the prices of products from the Thread Mills product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
-13.7%
+13.7%
100%
Average price
Most frequently purchasedNew products
Micro 100 SFPM-120-20 Single Flute Router, Right Hand Spiral, Metric Dimensions, 12 mm Cutter Diameter, 12 mm Shank Diameter, 40 mm Flute Length, 150 mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Micro 100 SFPM-120-20 Single Flute Router, Right Hand Spiral, Metric Dimensions, 12 mm Cutter Diameter, 12 mm Shank Diameter, 40 mm Flute Length, 150 mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
26.81 £
Shipping costs: 0.00 £
16ER 1.5 ISO Threading Insert For Steel/General Purpose Machining. Same Day Despatch From The UK from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
16ER 1.5 ISO Threading Insert For Steel/General Purpose Machining. Same Day Despatch From The UK
found at Amazon Marketplace
5.49 £
Shipping costs: 0.00 £
Dormer MF Thread Mill Spiral Flute 10°, Pack of 1 from Dormer Pramet
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Dormer MF Thread Mill Spiral Flute 10°, Pack of 1
found at Amazon
102.07 £
Shipping costs: 0.00 £
Sandvik Coromant T100M6 CoroTap 100 cutting tap with straight flutes from Sandvik Coromant
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Sandvik Coromant T100M6 CoroTap 100 cutting tap with straight flutes
found at Amazon
32.08 £
Shipping costs: 0.00 £
Sandvik Coromant R217.94-100190BC20N1630 CoroMill Plura solid carbide end mill for thread milling from Sandvik Coromant
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Sandvik Coromant R217.94-100190BC20N1630 CoroMill Plura solid carbide end mill for thread milling
found at Amazon
90.20 £
Shipping costs: 0.00 £
Dormer UNC Thread Mill Spiral Flute  Oil Feed, Pack of 1 from Dormer Pramet
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Dormer UNC Thread Mill Spiral Flute Oil Feed, Pack of 1
found at Amazon
219.12 £
Shipping costs: 0.00 £
Micro 100 SAT-1800-12X 29° Included Angle Stub Length ACME Threading Tool, AlTiN Coated, 0.360" Minimum Minor Diameter, 0.085" Projection, 1.800" Maximum Bore Depth, 0.033" Flat, 12 Threads per Inch, 0.3750" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Micro 100 SAT-1800-12X 29° Included Angle Stub Length ACME Threading Tool, AlTiN Coated, 0.360" Minimum Minor Diameter, 0.085" Projection, 1.800" Maximum Bore Depth, 0.033" Flat, 12 Threads per Inch, 0.3750" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
59.17 £
Shipping costs: 0.00 £
Dormer M Thread Mill Spiral Flute 27° Oil Feed, Pack of 1 from Dormer Pramet
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Dormer M Thread Mill Spiral Flute 27° Oil Feed, Pack of 1
found at Amazon
87.02 £
Shipping costs: 0.00 £
Micro 100 SAT-500-14X 29° Included Angle Stub Length ACME Threading Tool, AlTiN Coated, 0.235" Minimum Minor Diameter, 0.070" Projection, 0.500" Maximum Bore Depth, 0.028" Flat, 14 Threads per Inch, 0.3125" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Micro 100 SAT-500-14X 29° Included Angle Stub Length ACME Threading Tool, AlTiN Coated, 0.235" Minimum Minor Diameter, 0.070" Projection, 0.500" Maximum Bore Depth, 0.028" Flat, 14 Threads per Inch, 0.3125" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
47.52 £
Shipping costs: 0.00 £
Micro 100 SAT-2000-5X 29° Included Angle Stub Length ACME Threading Tool, AlTiN Coated, 0.490" Minimum Minor Diameter, 0.120" Projection, 2.000" Maximum Bore Depth, 0.079" Flat, 5 Threads per Inch, 0.5000" Shank Diameter, 3" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Micro 100 SAT-2000-5X 29° Included Angle Stub Length ACME Threading Tool, AlTiN Coated, 0.490" Minimum Minor Diameter, 0.120" Projection, 2.000" Maximum Bore Depth, 0.079" Flat, 5 Threads per Inch, 0.5000" Shank Diameter, 3" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
83.24 £
Shipping costs: 0.00 £
16ER 1.5 ISO Threading Insert For Steel/General Purpose Machining. Same Day Despatch From The UK from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
16ER 1.5 ISO Threading Insert For Steel/General Purpose Machining. Same Day Despatch From The UK
found at Amazon Marketplace
5.49 £
Shipping costs: 0.00 £
Micro 100 SAT-1800-12X 29° Included Angle Stub Length ACME Threading Tool, AlTiN Coated, 0.360" Minimum Minor Diameter, 0.085" Projection, 1.800" Maximum Bore Depth, 0.033" Flat, 12 Threads per Inch, 0.3750" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Micro 100 SAT-1800-12X 29° Included Angle Stub Length ACME Threading Tool, AlTiN Coated, 0.360" Minimum Minor Diameter, 0.085" Projection, 1.800" Maximum Bore Depth, 0.033" Flat, 12 Threads per Inch, 0.3750" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
59.17 £
Shipping costs: 0.00 £
Niagara Cutter NTM160-1/2X13UN-.375 NTM160 Carbide Thread Mill, AlCrN Finish, 3 Flutes, 1/2 x 13 UN Cutting Diameter, 3/8" Shank Diameter, 4 " Overall Length from Niagara Cutter
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Niagara Cutter NTM160-1/2X13UN-.375 NTM160 Carbide Thread Mill, AlCrN Finish, 3 Flutes, 1/2 x 13 UN Cutting Diameter, 3/8" Shank Diameter, 4 " Overall Length
found at Amazon Marketplace
209.12 £212.45 £
Shipping costs: 0.00 £
- 2%
Cleveland C30768 RG7 Multi-Flute Non-Center Cutting Coarse Profile End Mill from Cleveland
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Cleveland C30768 RG7 Multi-Flute Non-Center Cutting Coarse Profile End Mill
found at Amazon Marketplace
169.47 £172.10 £
Shipping costs: 0.00 £
- 2%
Cleveland C31099 RG7 Multi-Flute Non-Center Cutting Coarse Profile End Mill from Cleveland
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Cleveland C31099 RG7 Multi-Flute Non-Center Cutting Coarse Profile End Mill
found at Amazon Marketplace
102.18 £104.59 £
Shipping costs: 0.00 £
- 2%
Dormer A6208.2 Stub Drill, Bronze Coating, Cobalt High Speed Steel, 8.2 mm Head Diameter, 37 mm Flute Length (Pack of 10) from Dormer
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Dormer A6208.2 Stub Drill, Bronze Coating, Cobalt High Speed Steel, 8.2 mm Head Diameter, 37 mm Flute Length (Pack of 10)
from Dormer
found at Amazon Marketplace
30.49 £31.03 £
Shipping costs: 0.00 £
- 2%
Cleveland C31158 RG5 Multi-Flute Non-Center Cutting Fine Profile End Mill from Cleveland
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Cleveland C31158 RG5 Multi-Flute Non-Center Cutting Fine Profile End Mill
found at Amazon Marketplace
87.45 £89.29 £
Shipping costs: 0.00 £
- 2%
Bassett TMC Series Solid Carbide Coolant-Thru Thread Mill, TiAlN Coated, Helical Flute, 1/2"-13 UNC Size (Pack of 1) from Bassett
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Bassett TMC Series Solid Carbide Coolant-Thru Thread Mill, TiAlN Coated, Helical Flute, 1/2"-13 UNC Size (Pack of 1)
from Bassett
found at Amazon Marketplace
201.01 £
Shipping costs: 0.00 £
Bassett TMPC Series Solid Carbide Coolant-Thru Thread Mill, TiAlN Coated, Helical Flute, 1/2", 3/4"-14 NPT Size (Pack of 1) from Bassett
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Bassett TMPC Series Solid Carbide Coolant-Thru Thread Mill, TiAlN Coated, Helical Flute, 1/2", 3/4"-14 NPT Size (Pack of 1)
from Bassett
found at Amazon Marketplace
239.91 £
Shipping costs: 0.00 £
Bassett TMBPT Series Solid Carbide Non-Coolant Thread Mill, TiAlN Coated, Helical Flute, 1"-11 BSPT Size (Pack of 1) from Bassett
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Bassett TMBPT Series Solid Carbide Non-Coolant Thread Mill, TiAlN Coated, Helical Flute, 1"-11 BSPT Size (Pack of 1)
from Bassett
found at Amazon Marketplace
337.71 £
Shipping costs: 0.00 £
Dormer MF Thread Mill Spiral Flute 10°, Pack of 1 from Dormer Pramet
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Dormer MF Thread Mill Spiral Flute 10°, Pack of 1
found at Amazon
102.07 £
Shipping costs: 0.00 £
Dormer UNC Thread Mill Spiral Flute  Oil Feed, Pack of 1 from Dormer Pramet
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Dormer UNC Thread Mill Spiral Flute Oil Feed, Pack of 1
found at Amazon
219.12 £
Shipping costs: 0.00 £
Dormer M Thread Mill Spiral Flute 27° Oil Feed, Pack of 1 from Dormer Pramet
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Dormer M Thread Mill Spiral Flute 27° Oil Feed, Pack of 1
found at Amazon
87.02 £
Shipping costs: 0.00 £
Micro 100 SFPM-120-20 Single Flute Router, Right Hand Spiral, Metric Dimensions, 12 mm Cutter Diameter, 12 mm Shank Diameter, 40 mm Flute Length, 150 mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
Micro 100 SFPM-120-20 Single Flute Router, Right Hand Spiral, Metric Dimensions, 12 mm Cutter Diameter, 12 mm Shank Diameter, 40 mm Flute Length, 150 mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
26.81 £
Shipping costs: 0.00 £
Sandvik Coromant T100M6 CoroTap 100 cutting tap with straight flutes from Sandvik Coromant
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Sandvik Coromant T100M6 CoroTap 100 cutting tap with straight flutes
found at Amazon
32.08 £
Shipping costs: 0.00 £
Sandvik Coromant T120M12X1.5 CoroTap 100 cutting tap with straight flutes from Sandvik Coromant
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Sandvik Coromant T120M12X1.5 CoroTap 100 cutting tap with straight flutes
found at Amazon
222.12 £235.85 £
Shipping costs: 0.00 £
- 6%
16ER 1.5 ISO Threading Insert For Steel/General Purpose Machining. Same Day Despatch From The UK from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2019-12-10 at 02:53; the price may have changed since.
16ER 1.5 ISO Threading Insert For Steel/General Purpose Machining. Same Day Despatch From The UK
found at Amazon Marketplace
5.49 £
Shipping costs: 0.00 £
Sandvik Coromant R217.94-100190BC20N1630 CoroMill Plura solid carbide end mill for thread milling from Sandvik Coromant
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Sandvik Coromant R217.94-100190BC20N1630 CoroMill Plura solid carbide end mill for thread milling
found at Amazon
90.20 £
Shipping costs: 0.00 £
Sandvik Coromant R217.33C060240AC13N 1630 Coromill Plura Solid Carbide End Mill For Thread Milling from Sandvik Coromant
found at Amazon
last verified on 2019-12-08 at 11:57; the price may have changed since.
Sandvik Coromant R217.33C060240AC13N 1630 Coromill Plura Solid Carbide End Mill For Thread Milling
found at Amazon
69.93 £70.30 £
Shipping costs: 0.00 £
- 1%