"Indexable Insert Holders" in the category Business, Industry & Science

Welcome to Wunderstore, Britains's largest product search site with price comparison. You are currently in the Business, Industry & Science category in the "Indexable Insert Holders" department. With Wunderstore, you can browse more than 100 online shops for offers. In this way, you'll find almost every product from the Business, Industry & Science: Indexable Insert Holders section on our site that is currently available to buy online. And the best thing: not only will we show you which online shop you can currently buy the particular product you're looking for from, but we'll also let slip where you can buy that product at the best price!

To conduct a more targeted search, you can restrict the product selection to specific sub-sections such as "Coolant Hole Turning Holders", "Drilling Holders" or "Grooving Holders". You can also run a specific targeted search for products from particular brands with us. Use the search field or the filter at the side for this. In this way, you can restrict the product selection to Sandvik Coromant, Korloy, Widia or HHIP, for example. You can also use the filter at the side to search for products in specific colours or within certain price segments. And if you're on the hunt for a bargain, use the "Sale Filter" to find currently reduced items. In any case, we hope that we can help you with your search for good, well-priced offers on the internet using our price comparison tool.

Indexable Insert Holders: How you can benefit from comparing prices

Price trend for the Indexable Insert Holders product range in the Business, Industry & Science product group

Online shops constantly optimise their prices. Some prices are updated several times a day and adapted in line with competitors’ offers. Our price trend shows you the trend development of prices for products in the Business, Industry & Science/Indexable Insert Holders product range over the last few weeks and months.

We also, however, tell you when you can typically pick up products from the Business, Industry & Science/Indexable Insert Holders product range at a particularly attractive price. A good time is, for example, on wednesdays. For more details, see the price analysis graphs below.

By comparing prices, you can save a lot of money, in particular on big-ticket items. To make this extra easy for you, we show you for each product the online shop in which we found the current best offer and how much you can save in absolute and percentage terms with a price comparison.
Show details: When are products in the Indexable Insert Holders product range in the Business, Industry & Science product group particularly cheap?

Have you already thought about the right time to purchase of products in the Indexable Insert Holders product range in the Business, Industry & Science product group? We tell you the days of the week and specific times when the prices are particularly attractive.

Tuesday is the cheapest day of the week
mon
tue
wed
thu
fri
sat
sun
On mondays, products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 7.8% higher than the average weekly price.
On tuesdays, products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 14% lower than the average weekly price.
On wednesdays, products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 2.9% lower than the average weekly price.
On thursdays, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. thursday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On fridays, products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 1.5% higher than the average weekly price.
On saturdays, products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 1.4% lower than the average weekly price.
On sundays, products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 3.2% lower than the average weekly price.
-12.3%
+12.3%
100%
Average price
Are you already doing something between 11:00 and 12:00?
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 0:00 and 1:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 1:00 and 2:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 2:00 and 3:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 3:00 and 4:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 4:00 and 5:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 5:00 and 6:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 6:00 and 7:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 7:00 and 8:00, they are on average around 1.3% higher than the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 8:00 and 9:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 9:00 and 10:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 10:00 and 11:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 11:00 and 12:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 12:00 and 13:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 13:00 and 14:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 14:00 and 15:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 15:00 and 16:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 16:00 and 17:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 17:00 and 18:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 18:00 and 19:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 19:00 and 20:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 20:00 and 21:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 21:00 and 22:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 22:00 and 23:00, they are, however, largely in line with the daily average.
The prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 23:00 and 24:00, they are, however, largely in line with the daily average.
-1.3%
+1.3%
100%
Average price
It is probably not a bad idea to shop online for Indexable Insert Holders on wednesday between 12:00 and 18:00.
Monday
0-6
6-12
12-18
18-24
Tuesday
0-6
6-12
12-18
18-24
Wednesday
0-6
6-12
12-18
18-24
Thursday
0-6
6-12
12-18
18-24
Friday
0-6
6-12
12-18
18-24
Saturday
0-6
6-12
12-18
18-24
Sunday
0-6
6-12
12-18
18-24
On mondays between 0:00 and 6:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 5% higher than their respective average weekly price.
On mondays between 6:00 and 12:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 6.4% higher than their respective average weekly price.
Purchases can be expensive here.
On mondays between 12:00 and 18:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 7.8% higher than their respective average weekly price.
On mondays between 18:00 and 24:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 5% higher than their respective average weekly price.
On tuesdays between 0:00 and 6:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On tuesdays between 6:00 and 12:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 11.9% lower than their respective average weekly price.
On tuesdays between 12:00 and 18:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 1.2% higher than their respective average weekly price.
On tuesdays between 18:00 and 24:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 3.6% lower than their respective average weekly price.
On wednesdays between 0:00 and 6:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 19% lower than their respective average weekly price.
On wednesdays between 6:00 and 12:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 18.9% lower than their respective average weekly price.
This is the best time to buy.
On wednesdays between 12:00 and 18:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 19.4% lower than their respective average weekly price.
On wednesdays between 18:00 and 24:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On thursdays between 0:00 and 6:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 2.5% higher than their respective average weekly price.
On thursdays between 6:00 and 12:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 3.9% higher than their respective average weekly price.
On thursdays between 12:00 and 18:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On thursdays between 18:00 and 24:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 2.2% higher than their respective average weekly price.
On fridays between 0:00 and 6:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 1.7% higher than their respective average weekly price.
On fridays between 6:00 and 12:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 1.1% higher than their respective average weekly price.
On fridays between 12:00 and 18:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 1.1% higher than their respective average weekly price.
On fridays between 18:00 and 24:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 3.1% higher than their respective average weekly price.
On saturdays between 0:00 and 6:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On saturdays between 6:00 and 12:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 1.6% higher than their respective average weekly price.
On saturdays between 12:00 and 18:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On saturdays between 18:00 and 24:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average around 1.2% lower than their respective average weekly price.
On sundays between 0:00 and 6:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 6:00 and 12:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 12:00 and 18:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 18:00 and 24:00, the prices of products from the Indexable Insert Holders product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
-16.3%
+16.3%
100%
Average price
Most frequently purchasedNew products
R8-22 indexable face milling Cutter Connecting Rod Taper Shank Cutter Boom S for BAP400R-50-22D Cutter … from IRON ROOT
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
R8-22 indexable face milling Cutter Connecting Rod Taper Shank Cutter Boom S for BAP400R-50-22D Cutter …
found at Amazon Marketplace
27.90 £
Shipping costs: 0.00 £
New 1P C25-4D19 WC03 CNC U drill/indexable drill / 19mm-4D for WCMX03 Insert from IRON ROOT
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
New 1P C25-4D19 WC03 CNC U drill/indexable drill / 19mm-4D for WCMX03 Insert
found at Amazon Marketplace
29.90 £
Shipping costs: 0.00 £
Dormer A221SET Centre Drill Set, A221, Bright Coating, Cobalt High Speed Steel from Dormer
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Dormer A221SET Centre Drill Set, A221, Bright Coating, Cobalt High Speed Steel
from Dormer
found at Amazon Marketplace
40.51 £
Shipping costs: 3.83 £
Pack of 5 M3 x 6 torx screws for brackets/clamps, repaceable cutting insert from BC Industry
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Pack of 5 M3 x 6 torx screws for brackets/clamps, repaceable cutting insert
found at Amazon Marketplace
8.73 £
Shipping costs: 4.49 £
HHIP 3900-0291 Self Aligning Tap and Reamer Holder, 0-#8 from HHIP
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HHIP 3900-0291 Self Aligning Tap and Reamer Holder, 0-#8
from HHIP
found at Amazon
25.33 £
Shipping costs: 0.00 £
Korloy 1-06-001328 PWLNR Lever Lock Turning Tool Holder for WN**0604 from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-001328 PWLNR Lever Lock Turning Tool Holder for WN**0604
from Korloy
found at Amazon
39.98 £
Shipping costs: 0.00 £
Korloy 1-06-009175 PTFNL Lever Lock Turning Tool Holder for TN**1604 from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-009175 PTFNL Lever Lock Turning Tool Holder for TN**1604
from Korloy
found at Amazon
38.45 £
Shipping costs: 0.00 £
Sandvik Coromant 570-SDUCR-25-11 CoroTurn 107 head for turning from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant 570-SDUCR-25-11 CoroTurn 107 head for turning
found at Amazon
213.83 £
Shipping costs: 0.00 £
Sandvik Coromant DCLNR 2525M 12 Turning Insert Holder, Square Shank, Steel, External, Rigid Clamp, Right Hand, 25mm Width x 25mm Height Shank, 150mm Length x 32mm Width, CNMG 432 Insert Size, 95 Degree Entering Angle from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Sandvik Coromant DCLNR 2525M 12 Turning Insert Holder, Square Shank, Steel, External, Rigid Clamp, Right Hand, 25mm Width x 25mm Height Shank, 150mm Length x 32mm Width, CNMG 432 Insert Size, 95 Degree Entering Angle
found at Amazon Marketplace
117.77 £
Shipping costs: 6.23 £
Sandvik Coromant PSSNR 12 4BHP High Pressure Coolant Turning Insert Holder, Square Shank, Steel, External, Lever Lock, Right Hand, 3/4" Width x 3/4" Height Shank, 4.5" Length x 1" Width, SNMG 432 Insert Size from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Sandvik Coromant PSSNR 12 4BHP High Pressure Coolant Turning Insert Holder, Square Shank, Steel, External, Lever Lock, Right Hand, 3/4" Width x 3/4" Height Shank, 4.5" Length x 1" Width, SNMG 432 Insert Size
found at Amazon Marketplace
251.55 £
Shipping costs: 4.62 £
Sandvik Coromant A06M-STFCR 1.8-R Turning Insert Holder, Round Shank, Steel, Internal, Screw Clamp, Right Hand, 3/8" Shank Diameter, 6" Length x 0.265984" Width, TCMT 1.8(1.5)1 Insert Size, -9 Degree Inclination Angle from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Sandvik Coromant A06M-STFCR 1.8-R Turning Insert Holder, Round Shank, Steel, Internal, Screw Clamp, Right Hand, 3/8" Shank Diameter, 6" Length x 0.265984" Width, TCMT 1.8(1.5)1 Insert Size, -9 Degree Inclination Angle
found at Amazon Marketplace
147.07 £
Shipping costs: 5.70 £
Sandvik Coromant 880-D0710V80-03 CoroDrill 880 index able insert drill from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Sandvik Coromant 880-D0710V80-03 CoroDrill 880 index able insert drill
found at Amazon Marketplace
1,210.03 £
Shipping costs: 0.00 £
Sandvik Coromant 880-D0740V80-03 CoroDrill 880 index able insert drill from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Sandvik Coromant 880-D0740V80-03 CoroDrill 880 index able insert drill
found at Amazon Marketplace
1,211.40 £
Shipping costs: 0.00 £
Sandvik Coromant 880-D0780V80-04 CoroDrill 880 index able insert drill from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Sandvik Coromant 880-D0780V80-04 CoroDrill 880 index able insert drill
found at Amazon Marketplace
1,392.85 £
Shipping costs: 0.00 £
YG-1 AI114 Extended End Mill Holder, BT50 - EMH 1-6.00 from YG-1
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
YG-1 AI114 Extended End Mill Holder, BT50 - EMH 1-6.00
from YG-1
found at Amazon Marketplace
165.72 £
Shipping costs: 5.11 £
WIDIA A40VPCLNR16 A-PCLN P-Style Clamping Boring Bar for Negative Inserts, 95° Angle, Steel, 40mm Shank Diameter, Right, 400mm Length from WIDIA
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
WIDIA A40VPCLNR16 A-PCLN P-Style Clamping Boring Bar for Negative Inserts, 95° Angle, Steel, 40mm Shank Diameter, Right, 400mm Length
from WIDIA
found at Amazon Marketplace
333.40 £
Shipping costs: 16.17 £
Sandvik Coromant A419-063R19-14L CoroMill 419 Face Mill Cutter, Steel, Screw Clamp, Right Hand, 3/4" Arbor, 2-1/2" Cutting Diameter x 1-123/128" Overall Length, 4 Coarse Pitch from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Sandvik Coromant A419-063R19-14L CoroMill 419 Face Mill Cutter, Steel, Screw Clamp, Right Hand, 3/4" Arbor, 2-1/2" Cutting Diameter x 1-123/128" Overall Length, 4 Coarse Pitch
found at Amazon Marketplace
531.56 £
Shipping costs: 4.57 £
HHIP 3900-0140 Mt4 1" Morse Taper End Mill Holder-Drawbar End from HHIP
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HHIP 3900-0140 Mt4 1" Morse Taper End Mill Holder-Drawbar End
from HHIP
found at Amazon
34.50 £
Shipping costs: 0.00 £
Sandvik Coromant A419-102R38-14M CoroMill 419 Face Mill Cutter, Steel, Screw Clamp, Right Hand, 1-1/2" Arbor, 4" Cutting Diameter x 1-123/128" Overall Length, 6 Close Pitch from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Sandvik Coromant A419-102R38-14M CoroMill 419 Face Mill Cutter, Steel, Screw Clamp, Right Hand, 1-1/2" Arbor, 4" Cutting Diameter x 1-123/128" Overall Length, 6 Close Pitch
found at Amazon Marketplace
940.76 £
Shipping costs: 8.78 £
HHIP 3900-0106 R8 End Mill Holder, 7/8" from HHIP
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HHIP 3900-0106 R8 End Mill Holder, 7/8"
from HHIP
found at Amazon
30.33 £
Shipping costs: 0.00 £
Centaur 200IK511 RD/ER 20 Collets, Standard Precision, Clamping Range, ER20 10 mm - 79 mm from Centaur
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Centaur 200IK511 RD/ER 20 Collets, Standard Precision, Clamping Range, ER20 10 mm - 79 mm
from Centaur
found at Amazon Marketplace
74.24 £
Shipping costs: 5.11 £
10 Holes Key of C Phosphor Bronze Blues Harmonica with Bruce Standard Range & Delicate Spring & Cupronickel Base FH-002 from leonBonnie
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
10 Holes Key of C Phosphor Bronze Blues Harmonica with Bruce Standard Range & Delicate Spring & Cupronickel Base FH-002
found at Amazon Marketplace
26.99 £
Shipping costs: 0.00 £
Dormer A221SET Centre Drill Set, A221, Bright Coating, Cobalt High Speed Steel from Dormer
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Dormer A221SET Centre Drill Set, A221, Bright Coating, Cobalt High Speed Steel
from Dormer
found at Amazon Marketplace
40.51 £
Shipping costs: 3.83 £
Dormer A17045/64 1/2" Reduced Parallel Shank Drill, Steam Oxide Coating, High Speed Steel, 0.7031" Head Diameter, 3.1/8" Flute Length from Dormer
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Dormer A17045/64 1/2" Reduced Parallel Shank Drill, Steam Oxide Coating, High Speed Steel, 0.7031" Head Diameter, 3.1/8" Flute Length
from Dormer
found at Amazon Marketplace
37.60 £
Shipping costs: 4.36 £
WIDIA TCF550R4SL50MG Top Cut 4 Indexable Drill, 55 mm Cutting Diameter, 4xD, Right Hand Cut, 50 mm Shank, Insert Size G from WIDIA
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
WIDIA TCF550R4SL50MG Top Cut 4 Indexable Drill, 55 mm Cutting Diameter, 4xD, Right Hand Cut, 50 mm Shank, Insert Size G
from WIDIA
found at Amazon Marketplace
773.32 £
Shipping costs: 16.99 £
WIDIA HSK63AHPVTT044354HSK63A Shank Toolholder, 0.4375" Cutting Tool Shank Diameter, Shrink Fit Toolholder, 3.5433" Length from WIDIA
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
WIDIA HSK63AHPVTT044354HSK63A Shank Toolholder, 0.4375" Cutting Tool Shank Diameter, Shrink Fit Toolholder, 3.5433" Length
from WIDIA
found at Amazon Marketplace
225.30 £
Shipping costs: 3.68 £
GfG Instrumentation 1450-601 TS400 Test Station for G450/G460 Series, Single Cradle from GfG Instrumentation
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
GfG Instrumentation 1450-601 TS400 Test Station for G450/G460 Series, Single Cradle
found at Amazon Marketplace
1,117.01 £
Shipping costs: 11.48 £
Sandvik Coromant C4-RF123E08-27050B CoroCut 1-2 cutting unit for parting and grooving from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant C4-RF123E08-27050B CoroCut 1-2 cutting unit for parting and grooving
found at Amazon
236.40 £
Shipping costs: 0.00 £
R8-22 indexable face milling Cutter Connecting Rod Taper Shank Cutter Boom S for BAP400R-50-22D Cutter … from IRON ROOT
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
R8-22 indexable face milling Cutter Connecting Rod Taper Shank Cutter Boom S for BAP400R-50-22D Cutter …
found at Amazon Marketplace
27.90 £
Shipping costs: 0.00 £
HHIP #30 NMTB X 1-1/4 INCH END MILL HOLDER (3900-1698) from HHIP
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HHIP #30 NMTB X 1-1/4 INCH END MILL HOLDER (3900-1698)
from HHIP
found at Amazon
43.64 £
Shipping costs: 0.00 £
YG-1 AH104 Extended End Mill Holder, BT40 - EMH 3/8-4.00 from YG-1
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
YG-1 AH104 Extended End Mill Holder, BT40 - EMH 3/8-4.00
from YG-1
found at Amazon Marketplace
105.20 £
Shipping costs: 5.11 £
Acesa – Game 8 Rods Portfolio Leather Tekno + from Acesa
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Acesa – Game 8 Rods Portfolio Leather Tekno +
from Acesa
found at Amazon
47.89 £
Shipping costs: 0.00 £
Aloris Tool MXA-7 Universal Parting Blade Holder from Aloris Tool
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Aloris Tool MXA-7 Universal Parting Blade Holder
found at Amazon Marketplace
92.43 £
Shipping costs: 4.47 £
Aloris Tool CXA-7R Universal Parting Blade Holder, Reversible from Aloris Tool
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Aloris Tool CXA-7R Universal Parting Blade Holder, Reversible
found at Amazon Marketplace
139.00 £
Shipping costs: 7.66 £
Kodiak Cutting Tools 5415036 KCT USA Made Number 3 Screw Extractor from Kodiak Cutting Tools
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Kodiak Cutting Tools 5415036 KCT USA Made Number 3 Screw Extractor
found at Amazon Marketplace
9.39 £
Shipping costs: 3.56 £
Palmgren 9680532 7/16" Tap Holder with Clutch Fits Size 2 Quick Change Adaptor from Palmgren
found at Amazon Marketplace
last verified on 2019-02-19 at 16:34; the price may have changed since.
Palmgren 9680532 7/16" Tap Holder with Clutch Fits Size 2 Quick Change Adaptor
found at Amazon Marketplace
115.81 £
Shipping costs: 11.48 £
HHIP 3900-5412 KDK-102 Type Threading and Facing Bar Holder from HHIP
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HHIP 3900-5412 KDK-102 Type Threading and Facing Bar Holder
from HHIP
found at Amazon
51.64 £
Shipping costs: 0.00 £
Korloy 1-06-001328 PWLNR Lever Lock Turning Tool Holder for WN**0604 from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-001328 PWLNR Lever Lock Turning Tool Holder for WN**0604
from Korloy
found at Amazon
39.98 £
Shipping costs: 0.00 £
Korloy 1-06-009175 PTFNL Lever Lock Turning Tool Holder for TN**1604 from Korloy
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Korloy 1-06-009175 PTFNL Lever Lock Turning Tool Holder for TN**1604
from Korloy
found at Amazon
38.45 £
Shipping costs: 0.00 £
Sandvik Coromant 570-SDUCR-25-11 CoroTurn 107 head for turning from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant 570-SDUCR-25-11 CoroTurn 107 head for turning
found at Amazon
213.83 £
Shipping costs: 0.00 £