"Drill & Tap Sets" in the category Business, Industry & Science

Welcome to Wunderstore, Britains's largest product search site with price comparison. You are currently in the Business, Industry & Science category in the "Drill & Tap Sets" department. With Wunderstore, you can browse more than 100 online shops for offers. In this way, you'll find almost every product from the Business, Industry & Science: Drill & Tap Sets section on our site that is currently available to buy online. And the best thing: not only will we show you which online shop you can currently buy the particular product you're looking for from, but we'll also let slip where you can buy that product at the best price!

To conduct a more targeted search, you can restrict the product selection to specific sub-sections. You can also run a specific targeted search for products from particular brands with us. Use the search field or the filter at the side for this. In this way, you can restrict the product selection to Dormer, Wheeler Rex, Controx-Neuhaeuser or Sandvik Coromant, for example. You can also use the filter at the side to search for products in specific colours or within certain price segments. And if you're on the hunt for a bargain, use the "Sale Filter" to find currently reduced items. In any case, we hope that we can help you with your search for good, well-priced offers on the internet using our price comparison tool.

Drill & Tap Sets: How you can benefit from comparing prices

Price trend for the Drill & Tap Sets product range in the Business, Industry & Science product group

Online shops constantly optimise their prices. Some prices are updated several times a day and adapted in line with competitors’ offers. Our price trend shows you the trend development of prices for products in the Business, Industry & Science/Drill & Tap Sets product range over the last few weeks and months.

We also, however, tell you when you can typically pick up products from the Business, Industry & Science/Drill & Tap Sets product range at a particularly attractive price. A good time is, for example, on fridays. For more details, see the price analysis graphs below.

By comparing prices, you can save a lot of money, in particular on big-ticket items. To make this extra easy for you, we show you for each product the online shop in which we found the current best offer and how much you can save in absolute and percentage terms with a price comparison.
Show details: When are products in the Drill & Tap Sets product range in the Business, Industry & Science product group particularly cheap?

Have you already thought about the right time to purchase of products in the Drill & Tap Sets product range in the Business, Industry & Science product group? We tell you the days of the week and specific times when the prices are particularly attractive.

Friday is the cheapest day of the week
mon
tue
wed
thu
fri
sat
sun
On mondays, products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 11.2% higher than the average weekly price.
On tuesdays, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. tuesday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On wednesdays, products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 8.6% higher than the average weekly price.
On thursdays, products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 8.8% higher than the average weekly price.
On fridays, products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 34.9% lower than the average weekly price.
On saturdays, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are largely the same as the weekly average. saturday is typically neither a particularly expensive nor a particularly cheap day on which to buy these products.
On sundays, products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 10.2% higher than the average weekly price.
-25.9%
+25.9%
100%
Average price
Are you already doing something between 6:00 and 7:00?
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 0:00 and 1:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 1:00 and 2:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 2:00 and 3:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 3:00 and 4:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 4:00 and 5:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 5:00 and 6:00, they are on average around 2% lower than the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 6:00 and 7:00, they are on average around 2% lower than the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 7:00 and 8:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 8:00 and 9:00, they are on average around 1.1% lower than the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 9:00 and 10:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 10:00 and 11:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 11:00 and 12:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 12:00 and 13:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 13:00 and 14:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 14:00 and 15:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 15:00 and 16:00, they are on average around 1.8% lower than the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 16:00 and 17:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 17:00 and 18:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 18:00 and 19:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 19:00 and 20:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 20:00 and 21:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 21:00 and 22:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 22:00 and 23:00, they are, however, largely in line with the daily average.
The prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 23:00 and 24:00, they are, however, largely in line with the daily average.
-2%
+2%
100%
Average price
It is probably not a bad idea to shop online for Drill & Tap Sets on friday between 6:00 and 12:00.
Monday
0-6
6-12
12-18
18-24
Tuesday
0-6
6-12
12-18
18-24
Wednesday
0-6
6-12
12-18
18-24
Thursday
0-6
6-12
12-18
18-24
Friday
0-6
6-12
12-18
18-24
Saturday
0-6
6-12
12-18
18-24
Sunday
0-6
6-12
12-18
18-24
On mondays between 0:00 and 6:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 5.3% higher than their respective average weekly price.
On mondays between 6:00 and 12:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 5% higher than their respective average weekly price.
On mondays between 12:00 and 18:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 4.5% higher than their respective average weekly price.
On mondays between 18:00 and 24:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 4.3% higher than their respective average weekly price.
Purchases can be expensive here.
On tuesdays between 0:00 and 6:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 12.7% higher than their respective average weekly price.
On tuesdays between 6:00 and 12:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 2.4% higher than their respective average weekly price.
On tuesdays between 12:00 and 18:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 1.2% higher than their respective average weekly price.
On tuesdays between 18:00 and 24:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 11.6% higher than their respective average weekly price.
On wednesdays between 0:00 and 6:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 6:00 and 12:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 12:00 and 18:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On wednesdays between 18:00 and 24:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On thursdays between 0:00 and 6:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 5.3% higher than their respective average weekly price.
On thursdays between 6:00 and 12:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 6.1% higher than their respective average weekly price.
On thursdays between 12:00 and 18:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 5.2% higher than their respective average weekly price.
On thursdays between 18:00 and 24:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On fridays between 0:00 and 6:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 11.7% lower than their respective average weekly price.
This is the best time to buy.
On fridays between 6:00 and 12:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 35.9% lower than their respective average weekly price.
On fridays between 12:00 and 18:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 20.3% lower than their respective average weekly price.
On fridays between 18:00 and 24:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 15.6% lower than their respective average weekly price.
On saturdays between 0:00 and 6:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 8.7% higher than their respective average weekly price.
On saturdays between 6:00 and 12:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 1.7% higher than their respective average weekly price.
On saturdays between 12:00 and 18:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 3.5% lower than their respective average weekly price.
On saturdays between 18:00 and 24:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 8.7% higher than their respective average weekly price.
On sundays between 0:00 and 6:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 9% higher than their respective average weekly price.
On sundays between 6:00 and 12:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 9% higher than their respective average weekly price.
On sundays between 12:00 and 18:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 4.2% higher than their respective average weekly price.
On sundays between 18:00 and 24:00, the prices of products from the Drill & Tap Sets product range in the „Business, Industry & Science“ product group are on average around 6.8% higher than their respective average weekly price.
-26.4%
+26.4%
100%
Average price

Drill & Tap Sets

Sandvik Coromant 1B240-0635-XA 1630 Coromill Plura Solid Carbide Ball Nose End Mill from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant 1B240-0635-XA 1630 Coromill Plura Solid Carbide Ball Nose End Mill
found at Amazon
45.17 £
Shipping costs: 0.00 £
Dormer Hand Tap-Drill Set, Set of 2, Set 4 (E500M6NO2-A0025.0 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Hand Tap-Drill Set, Set of 2, Set 4 (E500M6NO2-A0025.0 x 2) millimeters cutting diameter
from Dormer
found at Amazon
9.85 £
Shipping costs: 4.49 £
Union Butterfield 3850N12 Tap Wrench, Straight Handle, 12, Hand Reamer Capacity 3/8" - 7/8", Hand Tap Capacity 3/8" - 1.1/8", Full Length 19" from Union Butterfield
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Union Butterfield 3850N12 Tap Wrench, Straight Handle, 12, Hand Reamer Capacity 3/8" - 7/8", Hand Tap Capacity 3/8" - 1.1/8", Full Length 19"
found at Amazon Marketplace
461.25 £
Shipping costs: 15.04 £
M1.2 x 0.25 HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
M1.2 x 0.25 HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut
found at Amazon Marketplace
11.99 £
Shipping costs: 0.00 £
Dormer Hand Tap-Drill Set, Set of 2, Set 6 (E500M10NO2-A0028.5 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Hand Tap-Drill Set, Set of 2, Set 6 (E500M10NO2-A0028.5 x 2) millimeters cutting diameter
from Dormer
found at Amazon
15.32 £
Shipping costs: 4.49 £
AES E.1534-SET Tap Set, M52 Thread x 5 mm Length from AES
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
AES E.1534-SET Tap Set, M52 Thread x 5 mm Length
from AES
found at Amazon Marketplace
896.81 £
Shipping costs: 0.00 £
Rocky Mountain Twist 95090878 Cobalt Screw Machine Set, 135° Split Point Geometry, Wire #1-#60 Size Range, 60 Piece Set from Rocky Mountain Twist
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Rocky Mountain Twist 95090878 Cobalt Screw Machine Set, 135° Split Point Geometry, Wire #1-#60 Size Range, 60 Piece Set
found at Amazon Marketplace
281.72 £
Shipping costs: 27.41 £
M3 x 0.5mm Thread Repair Kit 10pcs Stainless Insert Helicoil + Drill + Tap Set ABBOTT from ABBOTT
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
M3 x 0.5mm Thread Repair Kit 10pcs Stainless Insert Helicoil + Drill + Tap Set ABBOTT
from ABBOTT
found at Amazon Marketplace
12.80 £
Shipping costs: 1.89 £
HSS Straight Shank Drill Bit, 12.1 mm (Pk 5) from HSS
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HSS Straight Shank Drill Bit, 12.1 mm (Pk 5)
from HSS
found at Amazon
20.69 £
Shipping costs: 0.00 £
Rocky Mountain Twist 95090880 Cobalt Combination Size Screw Machine Set, 135° Split Point Geometry, 1/16" to 1/2", A-Z, and #1-#60 Size Range, 115 Piece Set from Rocky Mountain Twist
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Rocky Mountain Twist 95090880 Cobalt Combination Size Screw Machine Set, 135° Split Point Geometry, 1/16" to 1/2", A-Z, and #1-#60 Size Range, 115 Piece Set
found at Amazon Marketplace
992.06 £
Shipping costs: Details
Dormer DIN Tap-Drill Set, Set of 2, Set 4 (EP00M6-A0025.0 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer DIN Tap-Drill Set, Set of 2, Set 4 (EP00M6-A0025.0 x 2) millimeters cutting diameter
from Dormer
found at Amazon
15.50 £
Shipping costs: 4.49 £
Sandvik Coromant 393.14-40D200X160 ER collet for tap shank from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant 393.14-40D200X160 ER collet for tap shank
found at Amazon
125.29 £
Shipping costs: 0.00 £
Schumacher 68505/TR. 16X4 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68505/TR. 16X4 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread
found at Amazon
245.35 £
Shipping costs: 0.00 £
EULAGPRE 4pcs/Set Carpentry Countersink Drill Bit Wood Reamer Tool with Hex Shank #6 #10 #13 #16 from EULAGPRE
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
EULAGPRE 4pcs/Set Carpentry Countersink Drill Bit Wood Reamer Tool with Hex Shank #6 #10 #13 #16
found at Amazon Marketplace
4.99 £
Shipping costs: 0.00 £
Sandvik Coromant 393.14-110550 ER collet from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant 393.14-110550 ER collet
found at Amazon
36.36 £
Shipping costs: 0.00 £
Izar 56500 Set Thread Repair Kit Complete, HSS, 3312, MF10 – 1.25 from Izar
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Izar 56500 Set Thread Repair Kit Complete, HSS, 3312, MF10 – 1.25
from Izar
found at Amazon
40.24 £
Shipping costs: 0.00 £
Dormer ISO Tap-Drill Set, Set of 2, Set 5 (E002M8-A0026.8 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer ISO Tap-Drill Set, Set of 2, Set 5 (E002M8-A0026.8 x 2) millimeters cutting diameter
from Dormer
found at Amazon
20.50 £
Shipping costs: 0.00 £
Dormer DIN Tap-Drill Set, Set of 2, Set 6 (EP00M10-A0028.5 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer DIN Tap-Drill Set, Set of 2, Set 6 (EP00M10-A0028.5 x 2) millimeters cutting diameter
from Dormer
found at Amazon
23.02 £
Shipping costs: 0.00 £
Rocky Mountain Twist 95090879 Cobalt Screw Machine Set, 135° Split Point Geometry, Letter A-Z Size Range, 26 Piece Set from Rocky Mountain Twist
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Rocky Mountain Twist 95090879 Cobalt Screw Machine Set, 135° Split Point Geometry, Letter A-Z Size Range, 26 Piece Set
found at Amazon Marketplace
267.49 £
Shipping costs: 27.41 £
2mm Solid Carbide Centre Drill. 5mm Dia Shank. Bell Type. 2 Flute (Dimensions - 2mm x 2.8mm x 5mm x 40mm) from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
2mm Solid Carbide Centre Drill. 5mm Dia Shank. Bell Type. 2 Flute (Dimensions - 2mm x 2.8mm x 5mm x 40mm)
found at Amazon Marketplace
9.99 £
Shipping costs: 0.00 £
AES E.1533-SET Tap Set, M48 Thread x 5 mm Length from AES
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
AES E.1533-SET Tap Set, M48 Thread x 5 mm Length
from AES
found at Amazon Marketplace
701.75 £
Shipping costs: 0.00 £
Dormer Hand Tap-Drill Set, Set of 2, Set 3 (E500M5NO2-A0024.2 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Hand Tap-Drill Set, Set of 2, Set 3 (E500M5NO2-A0024.2 x 2) millimeters cutting diameter
from Dormer
found at Amazon
9.60 £
Shipping costs: 4.49 £
Schumacher 68505/TR. 26x5 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68505/TR. 26x5 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread
found at Amazon
447.33 £
Shipping costs: 0.00 £
Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap Set, Uncoated (Bright) Finish, Round with Square End Shank, 1-72 Size (Pack of 1) from Drill America
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap Set, Uncoated (Bright) Finish, Round with Square End Shank, 1-72 Size (Pack of 1)
found at Amazon Marketplace
21.16 £
Shipping costs: 3.55 £
Dormer DIN Tap-Drill Set, Set of 2, Set 11 (EX00M6-A0025.0 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer DIN Tap-Drill Set, Set of 2, Set 11 (EX00M6-A0025.0 x 2) millimeters cutting diameter
from Dormer
found at Amazon
17.05 £
Shipping costs: 4.49 £
Schumacher 68500/TR. 24x5 Through Hole Machine Nut Ngewinde Drill E from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68500/TR. 24x5 Through Hole Machine Nut Ngewinde Drill E
found at Amazon
334.43 £
Shipping costs: 0.00 £
Dormer Hand Tap-Drill Set, Set of 2, Set 12 (E500M8NO3-A0026.8 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Hand Tap-Drill Set, Set of 2, Set 12 (E500M8NO3-A0026.8 x 2) millimeters cutting diameter
from Dormer
found at Amazon
12.37 £
Shipping costs: 4.49 £
Rocky Mountain Twist 95090876 Black Oxide Screw Machine Set, 135° Split Point Geometry, Wire #1-#60 Size Range, 60 Piece Set from Rocky Mountain Twist
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Rocky Mountain Twist 95090876 Black Oxide Screw Machine Set, 135° Split Point Geometry, Wire #1-#60 Size Range, 60 Piece Set
found at Amazon Marketplace
188.91 £
Shipping costs: Details
M10 x 1mm Thread Repair Kit 10pcs Stainless Insert Helicoil + Drill + Tap Set ABBOTT from ABBOTT
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
M10 x 1mm Thread Repair Kit 10pcs Stainless Insert Helicoil + Drill + Tap Set ABBOTT
from ABBOTT
found at Amazon Marketplace
21.80 £
Shipping costs: 1.89 £
Schumacher 68505/TR. 20 x 4 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68505/TR. 20 x 4 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread
found at Amazon
293.90 £
Shipping costs: 0.00 £
Precision Twist 311SMSET29 Screw Machine Drill, 0.0625-0.5000 x 64ths Cutting Diameter, 135 Degree Cutting Angle, Right Cutting Direction, Standard Point Black Coating from Precision Twist Drill
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Precision Twist 311SMSET29 Screw Machine Drill, 0.0625-0.5000 x 64ths Cutting Diameter, 135 Degree Cutting Angle, Right Cutting Direction, Standard Point Black Coating
found at Amazon Marketplace
86.03 £
Shipping costs: 26.00 £
Sandvik Coromant 393.2060-3203099 Weldon to Quick change tapping chuck from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant 393.2060-3203099 Weldon to Quick change tapping chuck
found at Amazon
835.49 £
Shipping costs: 0.00 £
Dormer DIN Tap-Drill Set, Set of 2, Set 7 (EP00M12-A00210.2 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer DIN Tap-Drill Set, Set of 2, Set 7 (EP00M12-A00210.2 x 2) millimeters cutting diameter
from Dormer
found at Amazon
31.40 £
Shipping costs: 0.00 £
Union Butterfield 65413/4 General Purpose Pipe Taps, Bright Coating, Work-Rite, NPT3/4, Full Length 3.1/4", Flute Length 1.3/8", Shank Diameter 0.9060" from Union Butterfield
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Union Butterfield 65413/4 General Purpose Pipe Taps, Bright Coating, Work-Rite, NPT3/4, Full Length 3.1/4", Flute Length 1.3/8", Shank Diameter 0.9060"
found at Amazon Marketplace
62.29 £
Shipping costs: 4.55 £
M12 x 1.75 HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
M12 x 1.75 HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut
found at Amazon Marketplace
10.49 £
Shipping costs: 0.00 £
Dormer Hand Tap-Drill Set, Set of 2, Set 11 (E500M6NO3-A0025.0 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Hand Tap-Drill Set, Set of 2, Set 11 (E500M6NO3-A0025.0 x 2) millimeters cutting diameter
from Dormer
found at Amazon
9.85 £
Shipping costs: 4.49 £
Schumacher 68500/TR. 16X4 Through Hole Machine Nut Ngewinde Drill E from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68500/TR. 16X4 Through Hole Machine Nut Ngewinde Drill E
found at Amazon
218.14 £
Shipping costs: 0.00 £
Wheeler Rex 039-904066 Carbide Tip Cutter Shell for 1" DI Tap, 7/8" from Wheeler Rex
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Wheeler Rex 039-904066 Carbide Tip Cutter Shell for 1" DI Tap, 7/8"
found at Amazon Marketplace
158.94 £
Shipping costs: 29.30 £
HSS Straight Shank Drill Bit, 2.3 mm (Pk 10) from HSS
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HSS Straight Shank Drill Bit, 2.3 mm (Pk 10)
from HSS
found at Amazon
4.55 £
Shipping costs: 4.49 £
Dormer Stub Drill, Pack of 10, 4.76 millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Stub Drill, Pack of 10, 4.76 millimeters cutting diameter
from Dormer
found at Amazon
19.20 £
Shipping costs: 4.49 £
Sandvik Coromant RA216.24-2050AAK10P 1630 Coromill Plura Solid Carbide Square Shoulder End Mill from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant RA216.24-2050AAK10P 1630 Coromill Plura Solid Carbide Square Shoulder End Mill
found at Amazon
96.61 £
Shipping costs: 0.00 £
Sandvik Coromant A1B14-5020070 ISO 7388-1 to ER collet chuck from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant A1B14-5020070 ISO 7388-1 to ER collet chuck
found at Amazon
162.99 £
Shipping costs: 0.00 £
Rocky Mountain Twist 95090852 Titanium Jobber Set, 135° Split Point Geometry, Wire #1-#60 Size Range, 60 Piece Set from Rocky Mountain Twist
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Rocky Mountain Twist 95090852 Titanium Jobber Set, 135° Split Point Geometry, Wire #1-#60 Size Range, 60 Piece Set
found at Amazon Marketplace
559.62 £
Shipping costs: 27.41 £
AES E.1524-SET Tap Set, M22 Thread x 2.5 mm Length from AES
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
AES E.1524-SET Tap Set, M22 Thread x 2.5 mm Length
from AES
found at Amazon
109.50 £
Shipping costs: 0.00 £
HSS Straight Shank Drill Bit, 1.8 mm (Pk 10) from HSS
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HSS Straight Shank Drill Bit, 1.8 mm (Pk 10)
from HSS
found at Amazon
4.08 £
Shipping costs: 4.49 £
Hemobllo Mini electric drill USB Drill 5V from Hemobllo
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Hemobllo Mini electric drill USB Drill 5V
found at Amazon Marketplace
9.22 £
Shipping costs: 0.00 £
CH Hanson - Barricade Tape Caution (16000), 3 Wide x 1000 Ft by CH Hanson from CH Hanson
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
CH Hanson - Barricade Tape Caution (16000), 3 Wide x 1000 Ft by CH Hanson
found at Amazon Marketplace
40.61 £
Shipping costs: 3.99 £
AES E.1514-SET Tap Set, M7 Thread x 1 mm Length from AES
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
AES E.1514-SET Tap Set, M7 Thread x 1 mm Length
from AES
found at Amazon
36.36 £
Shipping costs: 0.00 £
M2.2 x 0.45 HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
M2.2 x 0.45 HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut
found at Amazon Marketplace
11.99 £
Shipping costs: 0.00 £
Izar 56482 Set of Spark Plugs, High-Speed Steel, 3311, M6-M14 from Izar
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Izar 56482 Set of Spark Plugs, High-Speed Steel, 3311, M6-M14
from Izar
found at Amazon
227.72 £314.19 £
Shipping costs: 13.80 £
- 28%
Dormer ISO Tap-Drill Set, Set of 2, Set 7 (E002M12-A00210.2 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer ISO Tap-Drill Set, Set of 2, Set 7 (E002M12-A00210.2 x 2) millimeters cutting diameter
from Dormer
found at Amazon
34.50 £
Shipping costs: 0.00 £
Izar 56484 Set Thread Repair Kit Complete, HSS, 3312, M4 – 0.70 from Izar
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Izar 56484 Set Thread Repair Kit Complete, HSS, 3312, M4 – 0.70
from Izar
found at Amazon
30.27 £
Shipping costs: 0.00 £
M6 x 1 - HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
M6 x 1 - HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut
found at Amazon Marketplace
5.79 £
Shipping costs: 0.00 £
Sandvik Coromant ER-TW-SET Torque wrench kit for ER collets from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant ER-TW-SET Torque wrench kit for ER collets
found at Amazon
1,033.73 £
Shipping costs: 0.00 £
Dormer ISO Tap-Drill Set, Set of 2, Set 4 (E000M6-A0025.0 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer ISO Tap-Drill Set, Set of 2, Set 4 (E000M6-A0025.0 x 2) millimeters cutting diameter
from Dormer
found at Amazon
15.50 £
Shipping costs: 4.49 £
1.25mm Solid Carbide Centre Drill. 3.15mm Dia Shank. Bell Type. 2 Flute (Dimensions - 1.25mm x 1.8mm x 3.15mm x 40mm) from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
1.25mm Solid Carbide Centre Drill. 3.15mm Dia Shank. Bell Type. 2 Flute (Dimensions - 1.25mm x 1.8mm x 3.15mm x 40mm)
found at Amazon Marketplace
7.99 £
Shipping costs: 0.00 £
Resin Capsule, 14 mm Drill Diameter, M12 x 110 mm (Pack of 10) from Bryson
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Resin Capsule, 14 mm Drill Diameter, M12 x 110 mm (Pack of 10)
from Bryson
found at Amazon
84.39 £
Shipping costs: 0.00 £
Hanchen Pearl Beads Driller Holing Machine Punching Machine with Jewelry Crafting Tool (110V) from Hanchen
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Hanchen Pearl Beads Driller Holing Machine Punching Machine with Jewelry Crafting Tool (110V)
from Hanchen
found at Amazon Marketplace
169.00 £
Shipping costs: 0.00 £
Wheeler Rex 039-802058 Adapter, 2" CTS from Wheeler Rex
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Wheeler Rex 039-802058 Adapter, 2" CTS
found at Amazon Marketplace
192.12 £
Shipping costs: 29.30 £
Izar 56487 Repair Kit Complete Threads, HSS 3312, M5-0.80 from Izar
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Izar 56487 Repair Kit Complete Threads, HSS 3312, M5-0.80
from Izar
found at Amazon Marketplace
30.41 £
Shipping costs: 0.00 £
Dormer E0611.1/2NO6 General Purpose Hand Taps Set, Bright Coating, TPUNC6, Full Length 6.3/8", Nominal D 1.1/2, Flute Length 1.8700", Shank Diameter 1.2330" from Dormer
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Dormer E0611.1/2NO6 General Purpose Hand Taps Set, Bright Coating, TPUNC6, Full Length 6.3/8", Nominal D 1.1/2, Flute Length 1.8700", Shank Diameter 1.2330"
from Dormer
found at Amazon Marketplace
1,291.32 £
Shipping costs: 13.43 £
Dormer ISO Tap-Drill Set, Set of 2 from Dormer
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Dormer ISO Tap-Drill Set, Set of 2
from Dormer
found at Amazon Marketplace
29.54 £31.40 £
Shipping costs: 0.00 £
- 6%
Sandvik Coromant RA216.24-1650AAK08P 1630 Coromill Plura Solid Carbide Square Shoulder End Mill from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant RA216.24-1650AAK08P 1630 Coromill Plura Solid Carbide Square Shoulder End Mill
found at Amazon
72.46 £
Shipping costs: 0.00 £
Wheeler Rex 039-802061 Adapter for Mueller 110, 2" from Wheeler Rex
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Wheeler Rex 039-802061 Adapter for Mueller 110, 2"
found at Amazon Marketplace
266.01 £
Shipping costs: 29.30 £
AES E.1562-FS Tap Set with Fine Pitch, M10 Thread x 1.00 mm Length from AES
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
AES E.1562-FS Tap Set with Fine Pitch, M10 Thread x 1.00 mm Length
from AES
found at Amazon
36.85 £
Shipping costs: 0.00 £
Electric Machine Pipe Threading BSPT 1/2 "-3/4", 1/2 " from EZ-Tools
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Electric Machine Pipe Threading BSPT 1/2 "-3/4", 1/2 "
found at Amazon Marketplace
2,049.27 £
Shipping costs: 4.99 £
Dormer Hand Tap-Drill Set, Set of 2, Set 10 (E500M5NO3-A0024.2 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Hand Tap-Drill Set, Set of 2, Set 10 (E500M5NO3-A0024.2 x 2) millimeters cutting diameter
from Dormer
found at Amazon
9.60 £
Shipping costs: 4.49 £
Dormer DIN Tap-Drill Set, Set of 2, Set 13 (EX00M10-A0028.5 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer DIN Tap-Drill Set, Set of 2, Set 13 (EX00M10-A0028.5 x 2) millimeters cutting diameter
from Dormer
found at Amazon
25.30 £
Shipping costs: 0.00 £
Schumacher 68500/TR. 18 x 4 Through Hole Machine Nut Ngewinde Drill E from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68500/TR. 18 x 4 Through Hole Machine Nut Ngewinde Drill E
found at Amazon
235.25 £
Shipping costs: 0.00 £
Dormer ISO Tap-Drill Set, Set of 2, Set 6 (E002M10-A0028.5 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer ISO Tap-Drill Set, Set of 2, Set 6 (E002M10-A0028.5 x 2) millimeters cutting diameter
from Dormer
found at Amazon
25.30 £
Shipping costs: 0.00 £
Dormer DIN Tap-Drill Set, Set of 2, Set 8 (EX00M3-A0022.5 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer DIN Tap-Drill Set, Set of 2, Set 8 (EX00M3-A0022.5 x 2) millimeters cutting diameter
from Dormer
found at Amazon
15.12 £
Shipping costs: 4.49 £
Schumacher 68505/TR. 14x3 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68505/TR. 14x3 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread
found at Amazon
292.88 £
Shipping costs: 0.00 £
Bestgle 6Pcs SAE Drill Tap Combination Bit Set 1/4-Inch Hex Shank Deburr Countersink Bits Kit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc from Bestgle
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Bestgle 6Pcs SAE Drill Tap Combination Bit Set 1/4-Inch Hex Shank Deburr Countersink Bits Kit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc
from Bestgle
found at Amazon Marketplace
28.70 £
Shipping costs: 3.70 £
Union Butterfield 3850N8 Tap Wrench, Straight Handle, 8, Hand Reamer Capacity 1/8" - 5/16", Hand Tap Capacity 1/16" - 5/16", Full Length 7" from Union Butterfield
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Union Butterfield 3850N8 Tap Wrench, Straight Handle, 8, Hand Reamer Capacity 1/8" - 5/16", Hand Tap Capacity 1/16" - 5/16", Full Length 7"
found at Amazon Marketplace
46.38 £
Shipping costs: 3.90 £
Schumacher 68505/TR. 22x5 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68505/TR. 22x5 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread
found at Amazon
381.96 £
Shipping costs: 0.00 £
Dormer DIN Tap-Drill Set, Set of 2, Set 10 (EX00M5-A0024.2 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer DIN Tap-Drill Set, Set of 2, Set 10 (EX00M5-A0024.2 x 2) millimeters cutting diameter
from Dormer
found at Amazon
16.65 £
Shipping costs: 4.49 £
HSS Straight Shank Drill Bit, 2.0 mm (Pk 10) from HSS
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HSS Straight Shank Drill Bit, 2.0 mm (Pk 10)
from HSS
found at Amazon
3.33 £
Shipping costs: 4.49 £
Izar 56493 Repair Kit Complete Threads, HSS 3312, M10-1.50 from Izar
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Izar 56493 Repair Kit Complete Threads, HSS 3312, M10-1.50
from Izar
found at Amazon Marketplace
41.48 £57.23 £
Shipping costs: 14.14 £
- 28%
Schumacher 68505/TR. 18 x 4 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68505/TR. 18 x 4 Through Hole Machine Nut/Ngewinde Drill Bit Hss Left Hand Thread
found at Amazon
240.87 £
Shipping costs: 0.00 £
Izar 56490 Set Thread Repair Kit Complete, HSS, 3312, M8 – 1.25 from Izar
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Izar 56490 Set Thread Repair Kit Complete, HSS, 3312, M8 – 1.25
from Izar
found at Amazon Marketplace
35.80 £
Shipping costs: 0.00 £
WElinks Adjustable T-Handle Tap Wrench, Reversible Ratchet Wrench Tapping Threading Tool + 4 Machine Screw Thread Metric Plug Tap + 4 Twist Drill Bits from WElinks
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
WElinks Adjustable T-Handle Tap Wrench, Reversible Ratchet Wrench Tapping Threading Tool + 4 Machine Screw Thread Metric Plug Tap + 4 Twist Drill Bits
from WElinks
found at Amazon Marketplace
6.22 £12.55 £
Shipping costs: 0.00 £
- 50%
Dormer ISO Tap-Drill Set, Set of 2, Set 5 (E000M8-A0026.8 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer ISO Tap-Drill Set, Set of 2, Set 5 (E000M8-A0026.8 x 2) millimeters cutting diameter
from Dormer
found at Amazon
18.60 £
Shipping costs: 4.49 £
AES E.1532-SET Tap Set, M45 Thread x 4.5 mm Length from AES
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
AES E.1532-SET Tap Set, M45 Thread x 4.5 mm Length
from AES
found at Amazon
608.99 £
Shipping costs: 0.00 £
Sandvik Coromant C8-CT-02 Accessory, Insert from Sandvik Coromant
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Sandvik Coromant C8-CT-02 Accessory, Insert
found at Amazon Marketplace
58.66 £
Shipping costs: 3.91 £
Schumacher 68500/TR. 36x6 Through Hole Machine Nut Ngewinde Drill E from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68500/TR. 36x6 Through Hole Machine Nut Ngewinde Drill E
found at Amazon
628.36 £
Shipping costs: 0.00 £
Dormer ISO Tap-Drill Set, Set of 2, Set 3 (E002M5-A0024.2 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer ISO Tap-Drill Set, Set of 2, Set 3 (E002M5-A0024.2 x 2) millimeters cutting diameter
from Dormer
found at Amazon
16.65 £
Shipping costs: 4.49 £
M10 x 1.5 HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut from Rennietool.co.uk
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
M10 x 1.5 HSS Hand/Machine Tap Set. 3 pieces - 1st, 2nd & 3rd Cut
found at Amazon Marketplace
8.75 £
Shipping costs: 0.00 £
Morse Cutting Tools 37103 Tap and Drill Set, NC Series, High Speed Steel, #103 Number by Morse Cutting Tools from Morse Cutting Tools
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Morse Cutting Tools 37103 Tap and Drill Set, NC Series, High Speed Steel, #103 Number by Morse Cutting Tools
found at Amazon Marketplace
207.92 £
Shipping costs: 2.80 £
DURATOOL ST-1.00 Twist Drill Bit, Tungsten, 1mm, 10mm Effective, 38.1mm Overall (5 pieces) from Duratool
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
DURATOOL ST-1.00 Twist Drill Bit, Tungsten, 1mm, 10mm Effective, 38.1mm Overall (5 pieces)
found at Amazon Marketplace
131.25 £
Shipping costs: 1.99 £
AES E.1563-FS Tap Set with Fine Pitch, M10 Thread x 1.25 mm Length from AES
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
AES E.1563-FS Tap Set with Fine Pitch, M10 Thread x 1.25 mm Length
from AES
found at Amazon
38.11 £
Shipping costs: 0.00 £
HSS Straight Shank Drill Bit, 6.1 mm (Pk 10) from HSS
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
HSS Straight Shank Drill Bit, 6.1 mm (Pk 10)
from HSS
found at Amazon
11.09 £
Shipping costs: 4.49 £
Schumacher 68500/TR. 12x3 Through Hole Machine Nut Ngewinde Drill E from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68500/TR. 12x3 Through Hole Machine Nut Ngewinde Drill E
found at Amazon
233.76 £
Shipping costs: 0.00 £
Sandvik Coromant S24-820XL-CP Cover plate from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant S24-820XL-CP Cover plate
found at Amazon
377.83 £
Shipping costs: 0.00 £
Schumacher 68500/TR. 30X6 Through Hole Machine Nut Ngewinde Drill E from Schumacher
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Schumacher 68500/TR. 30X6 Through Hole Machine Nut Ngewinde Drill E
found at Amazon
551.23 £
Shipping costs: 0.00 £
Dormer Spot Weld Drill, Pack of 10, 8.00 millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Spot Weld Drill, Pack of 10, 8.00 millimeters cutting diameter
from Dormer
found at Amazon
69.00 £
Shipping costs: 0.00 £
Dormer ISO Tap-Drill Set, Set of 2, Set 2 (E000M4-A0023.3 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer ISO Tap-Drill Set, Set of 2, Set 2 (E000M4-A0023.3 x 2) millimeters cutting diameter
from Dormer
found at Amazon
14.32 £
Shipping costs: 4.49 £
AES E.1526-SET Tap Set, M27 Thread x 3 mm Length from AES
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
AES E.1526-SET Tap Set, M27 Thread x 3 mm Length
from AES
found at Amazon
199.13 £
Shipping costs: 0.00 £
Sandvik Coromant R820E-AC20A Cover for CoroBore 820 from Sandvik Coromant
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Sandvik Coromant R820E-AC20A Cover for CoroBore 820
found at Amazon
201.60 £
Shipping costs: 0.00 £
Dormer Hand Tap-Drill Set, Set of 2, Set 2 (E500M4NO2-A0023.3 x 2) millimeters cutting diameter from Dormer
found at Amazon
last verified on 2018-10-22 at 15:28; the price may have changed since.
Dormer Hand Tap-Drill Set, Set of 2, Set 2 (E500M4NO2-A0023.3 x 2) millimeters cutting diameter
from Dormer
found at Amazon
8.42 £
Shipping costs: 4.49 £
Sandvik Coromant C6-CT-02 Accessory, Insert from Sandvik Coromant
found at Amazon Marketplace
last verified on 2018-12-16 at 21:46; the price may have changed since.
Sandvik Coromant C6-CT-02 Accessory, Insert
found at Amazon Marketplace
58.66 £
Shipping costs: 3.91 £