"Boring Bars" in the category Business, Industry & Science

Welcome to Wunderstore, Britains's largest product search site with price comparison. You are currently in the Business, Industry & Science category in the "Boring Bars" department. With Wunderstore, you can browse more than 100 online shops for offers. In this way, you'll find almost every product from the Business, Industry & Science: Boring Bars section on our site that is currently available to buy online. And the best thing: not only will we show you which online shop you can currently buy the particular product you're looking for from, but we'll also let slip where you can buy that product at the best price!

To conduct a more targeted search, you can restrict the product selection to specific sub-sections. You can also run a specific targeted search for products from particular brands with us. Use the search field or the filter at the side for this. In this way, you can restrict the product selection to Micro 100, Sandvik Coromant, Kyocera or HHIP, for example. You can also use the filter at the side to search for products in specific colours or within certain price segments. And if you're on the hunt for a bargain, use the "Sale Filter" to find currently reduced items. In any case, we hope that we can help you with your search for good, well-priced offers on the internet using our price comparison tool.

Boring Bars: How you can benefit from comparing prices

Price trend for the Boring Bars product range in the Business, Industry & Science product group

Online shops constantly optimise their prices. Some prices are updated several times a day and adapted in line with competitors’ offers. Our price trend shows you the trend development of prices for products in the Business, Industry & Science/Boring Bars product range over the last few weeks and months.

We also, however, tell you when you can typically pick up products from the Business, Industry & Science/Boring Bars product range at a particularly attractive price. A good time is, for example, on tuesdays. For more details, see the price analysis graphs below.

By comparing prices, you can save a lot of money, in particular on big-ticket items. To make this extra easy for you, we show you for each product the online shop in which we found the current best offer and how much you can save in absolute and percentage terms with a price comparison.
Show details: When are products in the Boring Bars product range in the Business, Industry & Science product group particularly cheap?

Have you already thought about the right time to purchase of products in the Boring Bars product range in the Business, Industry & Science product group? We tell you the days of the week and specific times when the prices are particularly attractive.

Tuesday is the cheapest day of the week
mon
tue
wed
thu
fri
sat
sun
On mondays, products from the Boring Bars product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 2.5% higher than the average weekly price.
On tuesdays, products from the Boring Bars product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 28.8% lower than the average weekly price.
On wednesdays, products from the Boring Bars product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 9.8% higher than the average weekly price.
On thursdays, products from the Boring Bars product range in the „Business, Industry & Science“ product group are slightly more expensive than the weekly average. The prices are around 8.5% higher than the average weekly price.
On fridays, products from the Boring Bars product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 2.5% lower than the average weekly price.
On saturdays, products from the Boring Bars product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 4% lower than the average weekly price.
On sundays, products from the Boring Bars product range in the „Business, Industry & Science“ product group tend to be cheaper than the weekly average. The prices are around 3.6% lower than the average weekly price.
-22.4%
+22.4%
100%
Average price
Are you already doing something between 23:00 and 24:00?
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 0:00 and 1:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 1:00 and 2:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 2:00 and 3:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 3:00 and 4:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 4:00 and 5:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 5:00 and 6:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 6:00 and 7:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 7:00 and 8:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 8:00 and 9:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 9:00 and 10:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 10:00 and 11:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 11:00 and 12:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 12:00 and 13:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 13:00 and 14:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 14:00 and 15:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 15:00 and 16:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 16:00 and 17:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 17:00 and 18:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 18:00 and 19:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 19:00 and 20:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 20:00 and 21:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 21:00 and 22:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 22:00 and 23:00, they are, however, largely in line with the daily average.
The prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group fluctuate during the course of the day. Between 23:00 and 24:00, they are, however, largely in line with the daily average.
-0.5%
+0.5%
100%
Average price
It is probably not a bad idea to shop online for Boring Bars on tuesday between 6:00 and 12:00.
Monday
0-6
6-12
12-18
18-24
Tuesday
0-6
6-12
12-18
18-24
Wednesday
0-6
6-12
12-18
18-24
Thursday
0-6
6-12
12-18
18-24
Friday
0-6
6-12
12-18
18-24
Saturday
0-6
6-12
12-18
18-24
Sunday
0-6
6-12
12-18
18-24
On mondays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 4% higher than their respective average weekly price.
On mondays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2.3% higher than their respective average weekly price.
On mondays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 1.2% higher than their respective average weekly price.
On mondays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On tuesdays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 18.4% lower than their respective average weekly price.
This is the best time to buy.
On tuesdays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 33.8% lower than their respective average weekly price.
On tuesdays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 26.6% lower than their respective average weekly price.
On tuesdays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 18.1% lower than their respective average weekly price.
On wednesdays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 4% higher than their respective average weekly price.
On wednesdays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 5.1% higher than their respective average weekly price.
On wednesdays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 3.7% higher than their respective average weekly price.
On wednesdays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 4% higher than their respective average weekly price.
On thursdays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 6.8% higher than their respective average weekly price.
Purchases can be expensive here.
On thursdays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 6.8% higher than their respective average weekly price.
On thursdays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 6.3% higher than their respective average weekly price.
On thursdays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 3.7% higher than their respective average weekly price.
On fridays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2.5% higher than their respective average weekly price.
On fridays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 1.7% lower than their respective average weekly price.
On fridays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 1.8% lower than their respective average weekly price.
On fridays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 1.3% lower than their respective average weekly price.
On saturdays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On saturdays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 3.1% lower than their respective average weekly price.
On saturdays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2.4% lower than their respective average weekly price.
On saturdays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 5.6% lower than their respective average weekly price.
On sundays between 0:00 and 6:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average the same as their respective average weekly price.
On sundays between 6:00 and 12:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2.8% lower than their respective average weekly price.
On sundays between 12:00 and 18:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 2% lower than their respective average weekly price.
On sundays between 18:00 and 24:00, the prices of products from the Boring Bars product range in the „Business, Industry & Science“ product group are on average around 4.7% lower than their respective average weekly price.
-25.2%
+25.2%
100%
Average price

Boring Bars

Micro 100 DBM-080250X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.080" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 8 mm Shank Diameter, 1.5" Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 DBM-080250X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.080" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 8 mm Shank Diameter, 1.5" Overall Length
found at Amazon Marketplace
44.81 £
Shipping costs: 3.60 £
Mitsubishi Materials MMTIR102-0.60-2.5-C Internal Threading Boring Bar with MMT11IR Insert, Right, With Coolant, 2.5° Angle, 0.625" Shank Dia, 0.600" Cutting Dia. from Mitsubishi Materials
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Mitsubishi Materials MMTIR102-0.60-2.5-C Internal Threading Boring Bar with MMT11IR Insert, Right, With Coolant, 2.5° Angle, 0.625" Shank Dia, 0.600" Cutting Dia.
found at Amazon Marketplace
31.20 £
Shipping costs: 4.31 £
Micro 100 IT-120250 Right Hand 60° Internal Single Point Threading Tool, 0.120" Minimum Minor Diameter, 0.030" Projection, 0.250" Maximum Bore Depth, 0.017" Offset Point, 24 to 56 Threads per Inch, 0.1875" Shank Diameter, 2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 IT-120250 Right Hand 60° Internal Single Point Threading Tool, 0.120" Minimum Minor Diameter, 0.030" Projection, 0.250" Maximum Bore Depth, 0.017" Offset Point, 24 to 56 Threads per Inch, 0.1875" Shank Diameter, 2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
32.40 £
Shipping costs: 3.55 £
Micro 100 QBM-3602000X Right Hand Quick Change Boring Tool for Milling Machine, Solid Carbide Tool, AlTiN Coated, 0.360"(9.14 mm) Minimum Bore Diameter, 2.000" (50.8 mm) Maximum Bore Depth, 0.175" (4.50 mm)Tip of Centerline to Cutting Tip, 0.008" (0.20 mm) Tool Radius, 0.3750" (9.5 mm) Shank Diameter, 3-1/2"(89 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QBM-3602000X Right Hand Quick Change Boring Tool for Milling Machine, Solid Carbide Tool, AlTiN Coated, 0.360"(9.14 mm) Minimum Bore Diameter, 2.000" (50.8 mm) Maximum Bore Depth, 0.175" (4.50 mm)Tip of Centerline to Cutting Tip, 0.008" (0.20 mm) Tool Radius, 0.3750" (9.5 mm) Shank Diameter, 3-1/2"(89 mm) Overall Length
found at Amazon Marketplace
73.53 £
Shipping costs: 3.75 £
Micro 100 QMBB-060150X Quick Change Miniature Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.060"(1.52 mm) Minimum Bore Diameter, 0.150" (3.8 mm) Maximum Bore Depth, 0.015" (0.38 mm) Projection, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QMBB-060150X Quick Change Miniature Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.060"(1.52 mm) Minimum Bore Diameter, 0.150" (3.8 mm) Maximum Bore Depth, 0.015" (0.38 mm) Projection, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
29.05 £
Shipping costs: 3.55 £
Micro 100 QPF-4901000 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.490" (12.5 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.150" (3.81 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QPF-4901000 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.490" (12.5 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.150" (3.81 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
81.40 £
Shipping costs: 3.82 £
Micro 100 QRB-3601500 Quick Change Reverse Boring Tool, Solid Carbide Tool, 0.360" (9.14 mm) Minimum Bore Diameter, 1.500"(38.1 mm) Maximum Bore Depth, 0.163"(4.14 mm) Tool Head Length, 0.130"(3.30 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3750"(9.4 mm) Shank Diameter, 3"(76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QRB-3601500 Quick Change Reverse Boring Tool, Solid Carbide Tool, 0.360" (9.14 mm) Minimum Bore Diameter, 1.500"(38.1 mm) Maximum Bore Depth, 0.163"(4.14 mm) Tool Head Length, 0.130"(3.30 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3750"(9.4 mm) Shank Diameter, 3"(76 mm) Overall Length
found at Amazon Marketplace
62.37 £
Shipping costs: 3.68 £
Micro 100 QIT-4602000X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.460" (11.7 mm) Minimum Bore Diameter, 0.120" (3.05 mm) Projection, 2.000" (50.8 mm) Maximum Bore Depth, 0.069" (1.75 mm) Offset Point, 8 to 24 Threads per Inch, 0.5000" (12.7 mm) Shank Diameter, 3.5" (89 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QIT-4602000X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.460" (11.7 mm) Minimum Bore Diameter, 0.120" (3.05 mm) Projection, 2.000" (50.8 mm) Maximum Bore Depth, 0.069" (1.75 mm) Offset Point, 8 to 24 Threads per Inch, 0.5000" (12.7 mm) Shank Diameter, 3.5" (89 mm) Overall Length
found at Amazon Marketplace
98.07 £
Shipping costs: 3.90 £
Micro 100, BB-140250S, Right Hand Boring Tool (No Cutting Radius), 0.140" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 0.035" Projection, 3/16" Shank Diameter, 2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-140250S, Right Hand Boring Tool (No Cutting Radius), 0.140" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 0.035" Projection, 3/16" Shank Diameter, 2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
24.80 £
Shipping costs: 3.68 £
Micro 100 QBB-2901750X Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.290"(7.37 mm) Minimum Bore Diameter, 1.750" (44.5 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QBB-2901750X Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.290"(7.37 mm) Minimum Bore Diameter, 1.750" (44.5 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
43.88 £
Shipping costs: 3.64 £
Micro 100 QPF-2301000 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.230" (5.84 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QPF-2301000 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.230" (5.84 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
45.09 £
Shipping costs: 3.64 £
Micro 100 HBB-025125X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.025" Minimum Bore Diameter, 0.125" Maximum Bore Depth, 0.1250" Shank Diameter, 0.020" Neck Diameter, 1.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 HBB-025125X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.025" Minimum Bore Diameter, 0.125" Maximum Bore Depth, 0.1250" Shank Diameter, 0.020" Neck Diameter, 1.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
32.63 £
Shipping costs: 3.53 £
Micro 100 QIT-3201000X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.320" (8.13 mm) Minimum Bore Diameter, 0.075" (1.91 mm) Projection, 1.000" (25.4 mm) Maximum Bore Depth, 0.043" (1.09 mm) Offset Point, 10 to 32 Threads per Inch, 0.3750" (9.5 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QIT-3201000X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.320" (8.13 mm) Minimum Bore Diameter, 0.075" (1.91 mm) Projection, 1.000" (25.4 mm) Maximum Bore Depth, 0.043" (1.09 mm) Offset Point, 10 to 32 Threads per Inch, 0.3750" (9.5 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
67.09 £
Shipping costs: 3.68 £
Micro 100, BBM-080820X, Right Hand Boring Tool (No Cutting Radius) AlTiN Coated, Metric Dimensions, 8mm Minimum Bore Diameter, 20mm Maximum Bore Depth, 2.00mm Projection, 8mm Shank Diameter, 63mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BBM-080820X, Right Hand Boring Tool (No Cutting Radius) AlTiN Coated, Metric Dimensions, 8mm Minimum Bore Diameter, 20mm Maximum Bore Depth, 2.00mm Projection, 8mm Shank Diameter, 63mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
40.08 £
Shipping costs: 3.64 £
Micro 100 QFR-038-8X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.038" (0.97 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.310" (7.9 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.3125" (7.9 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-038-8X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.038" (0.97 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.310" (7.9 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.3125" (7.9 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
11.40 £
Shipping costs: 3.55 £
KYOCERA MBE-1000L600 Micro Boring bar, Carbide, 0.1250" Shank Diameter, 0.600" Max Bore Depth, 1.5000" Length from KYOCERA
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
KYOCERA MBE-1000L600 Micro Boring bar, Carbide, 0.1250" Shank Diameter, 0.600" Max Bore Depth, 1.5000" Length
from KYOCERA
found at Amazon Marketplace
26.96 £
Shipping costs: 3.56 £
Micro 100 QIT-140500X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.140" (3.56 mm) Minimum Bore Diameter, 0.035" (0.89 mm) Projection, 0.500" (12.7 mm) Maximum Bore Depth, 0.020" (0.51 mm) Offset Point, 20 to 56 Threads per Inch, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QIT-140500X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.140" (3.56 mm) Minimum Bore Diameter, 0.035" (0.89 mm) Projection, 0.500" (12.7 mm) Maximum Bore Depth, 0.020" (0.51 mm) Offset Point, 20 to 56 Threads per Inch, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length
found at Amazon Marketplace
37.39 £
Shipping costs: 3.55 £
Micro 100 QMRR-020-500-100X Quick Change Miniature Retaining Ring Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.020" (0.51 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.100"(2.54 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QMRR-020-500-100X Quick Change Miniature Retaining Ring Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.020" (0.51 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.100"(2.54 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
4.53 £
Shipping costs: 3.55 £
Micro 100, BB-200500G, Right Hand Cutting Radius Boring Tool, TiN Coated, 0.200" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.050" Projection, 0.005" Tool Radius, 1/4" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-200500G, Right Hand Cutting Radius Boring Tool, TiN Coated, 0.200" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.050" Projection, 0.005" Tool Radius, 1/4" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
30.44 £
Shipping costs: 3.55 £
Micro 100 QPR-2301250X Quick Change Profiling Tool, Solid Carbide Tool, AlTiN Coated, 0.230" (5.84 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QPR-2301250X Quick Change Profiling Tool, Solid Carbide Tool, AlTiN Coated, 0.230" (5.84 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
50.36 £
Shipping costs: 3.55 £
Aloris Tool CBB-3 Adjustable Chip Breaker Boring Bar from Aloris Tool
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Aloris Tool CBB-3 Adjustable Chip Breaker Boring Bar
found at Amazon Marketplace
171.29 £
Shipping costs: 5.12 £
HHIP 1001-0775 Round Shank Indexable Boring Bar, 3-5/8" x 3/4"' from HHIP
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
HHIP 1001-0775 Round Shank Indexable Boring Bar, 3-5/8" x 3/4"'
from HHIP
found at Amazon Marketplace
33.89 £
Shipping costs: 5.11 £
Micro 100, BB-3201600X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.320" Minimum Bore Diameter, 1.600" Maximum Bore Depth, 0.080" Projection, 0.005" Tool Radius, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-3201600X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.320" Minimum Bore Diameter, 1.600" Maximum Bore Depth, 0.080" Projection, 0.005" Tool Radius, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
56.76 £
Shipping costs: 3.72 £
Micro 100, BBM-040313X, Right Hand Boring Tool (No Cutting Radius) AlTiN Coated, Metric Dimensions, 3mm Minimum Bore Diameter, 134mm Maximum Bore Depth, 0.75mm Projection, 4mm Shank Diameter, 50mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BBM-040313X, Right Hand Boring Tool (No Cutting Radius) AlTiN Coated, Metric Dimensions, 3mm Minimum Bore Diameter, 134mm Maximum Bore Depth, 0.75mm Projection, 4mm Shank Diameter, 50mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
24.64 £
Shipping costs: 3.55 £
Micro 100 QMFR-015-500-100X Quick Change Miniature Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.015" (0.38 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.100"(2.54 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QMFR-015-500-100X Quick Change Miniature Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.015" (0.38 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.100"(2.54 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
8.46 £
Shipping costs: 3.55 £
HHIP 6004-8432 TCMT-432-HR Triangle +Rake Insert-xAB749 from HHIP
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
HHIP 6004-8432 TCMT-432-HR Triangle +Rake Insert-xAB749
from HHIP
found at Amazon Marketplace
14.75 £
Shipping costs: 3.83 £
Micro 100 QIT-110400X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.110" (2.79 mm) Minimum Bore Diameter, 0.030" (0.76 mm) Projection, 0.400" (10.2 mm) Maximum Bore Depth, 0.016" (0.041 mm) Offset Point, 32 to 64 Threads per Inch, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QIT-110400X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.110" (2.79 mm) Minimum Bore Diameter, 0.030" (0.76 mm) Projection, 0.400" (10.2 mm) Maximum Bore Depth, 0.016" (0.041 mm) Offset Point, 32 to 64 Threads per Inch, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length
found at Amazon Marketplace
37.43 £
Shipping costs: 3.55 £
Micro 100 QFR-038-6 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.038" (0.97 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.310" (7.9 mm) Minimum Bore Diameter, 0.375" (9.5 mm) Maximum Bore Depth, 0.3125" (7.9 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-038-6 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.038" (0.97 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.310" (7.9 mm) Minimum Bore Diameter, 0.375" (9.5 mm) Maximum Bore Depth, 0.3125" (7.9 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
8.05 £
Shipping costs: 3.60 £
Sandvik Coromant A16T-SVPBL 3 Steel CoroTurn 107 Boring Bar, 1.00" Shank Diameter, Internal Coolant Supply from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Sandvik Coromant A16T-SVPBL 3 Steel CoroTurn 107 Boring Bar, 1.00" Shank Diameter, Internal Coolant Supply
found at Amazon Marketplace
203.82 £
Shipping costs: 7.14 £
Aloris Tool BB-1 Reversible Boring Bar from Aloris Tool
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Aloris Tool BB-1 Reversible Boring Bar
found at Amazon Marketplace
48.66 £
Shipping costs: 5.12 £
Micro 100 QFR-125-24 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.125" (3.18 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.500" (38.1 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-125-24 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.125" (3.18 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.500" (38.1 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length
found at Amazon Marketplace
89.04 £
Shipping costs: 3.75 £
Micro 100 HBB-2101000X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.210" Minimum Bore Diameter, 1" Maximum Bore Depth, 0.250" Shank Diameter, 0.185" Neck Diameter, 2.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 HBB-2101000X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.210" Minimum Bore Diameter, 1" Maximum Bore Depth, 0.250" Shank Diameter, 0.185" Neck Diameter, 2.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
31.74 £
Shipping costs: 3.60 £
KYOCERA MBE-0197L079 Micro Boring Bar, Carbide, 3 mm Shank Diameter, 2 mm Max Bore Depth, 38 mm Length from KYOCERA
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
KYOCERA MBE-0197L079 Micro Boring Bar, Carbide, 3 mm Shank Diameter, 2 mm Max Bore Depth, 38 mm Length
from KYOCERA
found at Amazon Marketplace
30.70 £
Shipping costs: 3.57 £
Micro 100 UC-50093-24X Right Hand Undercut Grooving Tool, AlTIN Coated, 0.093"/.095" Groove Width, 0.150" Projection, 0.510" Minimum Bore Diameter, 1.500" Maximum Bore Depth, 0.5000" Shank Diameter, 3" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 UC-50093-24X Right Hand Undercut Grooving Tool, AlTIN Coated, 0.093"/.095" Groove Width, 0.150" Projection, 0.510" Minimum Bore Diameter, 1.500" Maximum Bore Depth, 0.5000" Shank Diameter, 3" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
84.26 £
Shipping costs: 3.77 £
Micro 100, BB-3601600SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.360" Minimum Bore Diameter, 1.600" Maximum Bore Depth, 0.090" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-3601600SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.360" Minimum Bore Diameter, 1.600" Maximum Bore Depth, 0.090" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
55.35 £
Shipping costs: 3.72 £
Micro 100 IT-360750 Right Hand 60° Internal Single Point Threading Tool, 0.360" Minimum Minor Diameter, 0.085" Projection, 0.750" Maximum Bore Depth, 0.049" Offset Point, 10 to 32 Threads per Inch, 0.750" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 IT-360750 Right Hand 60° Internal Single Point Threading Tool, 0.360" Minimum Minor Diameter, 0.085" Projection, 0.750" Maximum Bore Depth, 0.049" Offset Point, 10 to 32 Threads per Inch, 0.750" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
55.75 £
Shipping costs: 3.68 £
Micro 100 QFR-125-20 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.125" (3.18 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-125-20 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.125" (3.18 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length
found at Amazon Marketplace
89.08 £
Shipping costs: 3.91 £
Micro 100 MBB-045100 Miniature Right Hand Boring Tool, 0.045" Minimum Bore Diameter, 0.100" Maximum Bore Depth, 0.1875" Shank Diameter, 1.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 MBB-045100 Miniature Right Hand Boring Tool, 0.045" Minimum Bore Diameter, 0.100" Maximum Bore Depth, 0.1875" Shank Diameter, 1.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
31.45 £
Shipping costs: 3.55 £
Micro 100 QRR-030-4 Quick Change Retaining Ring Grooving Tool, Solid Carbide Tool, 0.030" (0.76 mm) Groove Width, 0.050" (1.27 mm) Projection, 0.245" (6.2 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.2500" (6.4 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QRR-030-4 Quick Change Retaining Ring Grooving Tool, Solid Carbide Tool, 0.030" (0.76 mm) Groove Width, 0.050" (1.27 mm) Projection, 0.245" (6.2 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.2500" (6.4 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
36.10 £
Shipping costs: 3.60 £
HHIP 6004-9031 TCMT-32.51 Triangle(+Rake) Insert-TiN(C6) from HHIP
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
HHIP 6004-9031 TCMT-32.51 Triangle(+Rake) Insert-TiN(C6)
from HHIP
found at Amazon Marketplace
8.33 £
Shipping costs: 3.68 £
Micro 100, BB-360500SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.360" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.090" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-360500SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.360" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.090" Projection, 3/8" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
55.41 £
Shipping costs: 3.72 £
Micro 100 QPR-070500X Quick Change Profiling Tool, Solid Carbide Tool, AlTiN Coated, 0.070" (1.78 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.025" (0.64 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QPR-070500X Quick Change Profiling Tool, Solid Carbide Tool, AlTiN Coated, 0.070" (1.78 mm) Minimum Bore Diameter, 0.500" (12.7 mm) Maximum Bore Depth, 0.025" (0.64 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length
found at Amazon Marketplace
30.77 £
Shipping costs: 3.57 £
Micro 100 ITM-087420 Right Hand 60° Internal Single Point Threading Tool, Metric Dimensions, 7.4 mm Minimum Bore Diameter, 1.9 mm Projection, 20 mm Maximum Bore Depth, 1.09 mm Offset Point, 18 to 56 Threads per Inch, 8 mm Shank Diameter, 63 mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 ITM-087420 Right Hand 60° Internal Single Point Threading Tool, Metric Dimensions, 7.4 mm Minimum Bore Diameter, 1.9 mm Projection, 20 mm Maximum Bore Depth, 1.09 mm Offset Point, 18 to 56 Threads per Inch, 8 mm Shank Diameter, 63 mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
41.02 £
Shipping costs: 3.55 £
Micro 100 UP-50093-24X Right Hand Undercut and Profile Grooving Tool, AlTiN Coated, 0.093"/.095" Groove Width, 0.150" Projection, 0.510" Minimum Bore Diameter, 1.500" Maximum Bore Depth, 0.5000" Shank Diameter, 3" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 UP-50093-24X Right Hand Undercut and Profile Grooving Tool, AlTiN Coated, 0.093"/.095" Groove Width, 0.150" Projection, 0.510" Minimum Bore Diameter, 1.500" Maximum Bore Depth, 0.5000" Shank Diameter, 3" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
91.78 £
Shipping costs: 3.77 £
Micro 100 QBT-060400X Quick Change Boring Tool with Top Rake Chip Breaker, Solid Carbide Tool, AlTiN Coated, 0.060"(1.52 mm) Minimum Bore Diameter, 0.400" (10.2 mm) Maximum Bore Depth, 0.007" (0.18 mm) Projection, 0.002" (0.05 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QBT-060400X Quick Change Boring Tool with Top Rake Chip Breaker, Solid Carbide Tool, AlTiN Coated, 0.060"(1.52 mm) Minimum Bore Diameter, 0.400" (10.2 mm) Maximum Bore Depth, 0.007" (0.18 mm) Projection, 0.002" (0.05 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
30.77 £
Shipping costs: 3.55 £
Micro 100 QPR-120750 Quick Change Profiling Tool, Solid Carbide Tool, 0.120" (3.05 mm) Minimum Bore Diameter, 0.750" (19.1 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QPR-120750 Quick Change Profiling Tool, Solid Carbide Tool, 0.120" (3.05 mm) Minimum Bore Diameter, 0.750" (19.1 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
28.95 £
Shipping costs: 3.55 £
Micro 100 QFR-093-12X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.093" (2.36 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 0.750" (19.1 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-093-12X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.093" (2.36 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 0.750" (19.1 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
95.91 £
Shipping costs: 3.83 £
KYOCERA MBS-1400.700 Micro Boring Bar, Carbide, 0.1875" Shank Diameter, 0.700" Max Bore Depth, 2" Length from KYOCERA
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
KYOCERA MBS-1400.700 Micro Boring Bar, Carbide, 0.1875" Shank Diameter, 0.700" Max Bore Depth, 2" Length
from KYOCERA
found at Amazon Marketplace
24.02 £
Shipping costs: 3.57 £
DCMT070202 Sducl 07 Boring Bar 10 mm with WSP Tin for Steel from CNC QUALITÄT
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
DCMT070202 Sducl 07 Boring Bar 10 mm with WSP Tin for Steel
found at Amazon Marketplace
23.38 £
Shipping costs: 0.00 £
Micro 100 QMRR-015-250-080X Quick Change Miniature Retaining Ring Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.015" (0.38 mm) Groove Width, 0.025" (0.64 mm) Projection, 0.080"(2.03 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QMRR-015-250-080X Quick Change Miniature Retaining Ring Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.015" (0.38 mm) Groove Width, 0.025" (0.64 mm) Projection, 0.080"(2.03 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
8.46 £
Shipping costs: 5.11 £
Sandvik Coromant CoroTurn XS Carbide Grooving Insert, GC1025 Grade, Multi-Layer Coating, 1 Cutting Edge, CXS-06G078-6215L, Left Hand Orientation, 0.031" Cutting Width, 0" Corner Radius, 06 Insert Seat Size (Pack of 1) from Sandvik Coromant
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Sandvik Coromant CoroTurn XS Carbide Grooving Insert, GC1025 Grade, Multi-Layer Coating, 1 Cutting Edge, CXS-06G078-6215L, Left Hand Orientation, 0.031" Cutting Width, 0" Corner Radius, 06 Insert Seat Size (Pack of 1)
found at Amazon Marketplace
38.14 £
Shipping costs: 3.57 £
Micro 100, BB-100600X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.100" Minimum Bore Diameter, 0.600" Maximum Bore Depth, 0.025" Projection, 0.003" Tool Radius, 1/8" Shank Diameter, 1-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-100600X, Right Hand Cutting Radius Boring Tool, AlTiN Coated, 0.100" Minimum Bore Diameter, 0.600" Maximum Bore Depth, 0.025" Projection, 0.003" Tool Radius, 1/8" Shank Diameter, 1-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
26.12 £
Shipping costs: 3.53 £
Micro 100 QFR-093-20 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.093" (2.36 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-093-20 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.093" (2.36 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length
found at Amazon Marketplace
89.06 £
Shipping costs: 3.83 £
Aloris Tool BXA-2-IX Oversize Indexable Turning, Facing and Boring Holder from Aloris Tool
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Aloris Tool BXA-2-IX Oversize Indexable Turning, Facing and Boring Holder
found at Amazon Marketplace
110.18 £
Shipping costs: 5.43 £
Ultra-Dex AS1750-16 Steel Modular Boring Bar, 2.010" Minimum Bore, Serrated"CFT" Style Connection, Coolant Thru, 1.750" x 16" from Ultradex
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Ultra-Dex AS1750-16 Steel Modular Boring Bar, 2.010" Minimum Bore, Serrated"CFT" Style Connection, Coolant Thru, 1.750" x 16"
found at Amazon Marketplace
151.11 £
Shipping costs: 22.24 £
Micro 100 DBM-1601000 Coolant Through Boring Tools for MIniDigi Boring Heads, 0.160" Minimum Bore Diameter, 1" Maximum Bore Depth, 8 mm Shank Diameter, 2.5" Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 DBM-1601000 Coolant Through Boring Tools for MIniDigi Boring Heads, 0.160" Minimum Bore Diameter, 1" Maximum Bore Depth, 8 mm Shank Diameter, 2.5" Overall Length
found at Amazon Marketplace
40.75 £
Shipping costs: 3.65 £
Micro 100 QMBB-060200X Quick Change Miniature Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.060"(1.52 mm) Minimum Bore Diameter, 0.200" (5.1 mm) Maximum Bore Depth, 0.015" (0.38 mm) Projection, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QMBB-060200X Quick Change Miniature Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.060"(1.52 mm) Minimum Bore Diameter, 0.200" (5.1 mm) Maximum Bore Depth, 0.015" (0.38 mm) Projection, 0.1875" (4.8 mm) Shank Diameter, 1-1/2"(38 mm) Overall Length
found at Amazon Marketplace
29.05 £
Shipping costs: 3.57 £
Micro 100 QBT-1601000X Quick Change Boring Tool with Top Rake Chip Breaker, Solid Carbide Tool, AlTiN Coated, 0.160"(4.06 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.025" (0.64 mm) Projection, 0.004" (0.10 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 2"(51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QBT-1601000X Quick Change Boring Tool with Top Rake Chip Breaker, Solid Carbide Tool, AlTiN Coated, 0.160"(4.06 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.025" (0.64 mm) Projection, 0.004" (0.10 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 2"(51 mm) Overall Length
found at Amazon Marketplace
30.77 £
Shipping costs: 3.55 £
Glanze 800037 5/8" Steel Boring Bar Coolant Through, A10M SDUCR-2 DCMT 21.5, Nickel Finish from Glanze
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Glanze 800037 5/8" Steel Boring Bar Coolant Through, A10M SDUCR-2 DCMT 21.5, Nickel Finish
from Glanze
found at Amazon Marketplace
51.55 £
Shipping costs: 4.31 £
Micro 100 HBB-035125X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.035" Minimum Bore Diameter, 0.125" Maximum Bore Depth, 0.1250" Shank Diameter, 0.030" Neck Diameter, 1.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 HBB-035125X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.035" Minimum Bore Diameter, 0.125" Maximum Bore Depth, 0.1250" Shank Diameter, 0.030" Neck Diameter, 1.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
25.64 £
Shipping costs: 3.53 £
TAIKI 3900-4775 22 mm 3 Piece Aluminum Soft Jaw Set, 15" x 1.5 mm x 60 Degree from TAIKI
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
TAIKI 3900-4775 22 mm 3 Piece Aluminum Soft Jaw Set, 15" x 1.5 mm x 60 Degree
from TAIKI
found at Amazon Marketplace
197.44 £
Shipping costs: 19.45 £
Micro 100 QPF-180750X Quick Change Boring and Profiling Tool, Solid Carbide Tool, AlTiN Coated, 0.180" (4.57 mm) Minimum Bore Diameter, 0.750" (19.1 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.2500" (6.4 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QPF-180750X Quick Change Boring and Profiling Tool, Solid Carbide Tool, AlTiN Coated, 0.180" (4.57 mm) Minimum Bore Diameter, 0.750" (19.1 mm) Maximum Bore Depth, 0.080" (2.03 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.2500" (6.4 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
39.78 £
Shipping costs: 3.55 £
Micro 100, BB-1801000SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.180" Minimum Bore Diameter, 1.000" Maximum Bore Depth, 0.045" Projection, 1/4" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-1801000SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.180" Minimum Bore Diameter, 1.000" Maximum Bore Depth, 0.045" Projection, 1/4" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
30.41 £
Shipping costs: 3.61 £
HHIP 1001-0781 Round Shank Indexable Boring Bar, 5" x 3/4" from HHIP
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
HHIP 1001-0781 Round Shank Indexable Boring Bar, 5" x 3/4"
from HHIP
found at Amazon Marketplace
33.89 £
Shipping costs: 5.11 £
BORITE Indexable Boring Bars 4 Piece Set - MODEL : IB-500 Minimum Bore: 1/2 by BORITE from BORITE
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
BORITE Indexable Boring Bars 4 Piece Set - MODEL : IB-500 Minimum Bore: 1/2 by BORITE
from BORITE
found at Amazon Marketplace
241.30 £
Shipping costs: 4.48 £
Micro 100 QBM-3001000 Right Hand Quick Change Boring Tool for Milling Machine, Solid Carbide Tool, 0.300"(7.62 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.145" (3.70 mm)Tip of Centerline to Cutting Tip, 0.008" (0.20 mm) Tool Radius, 0.3750" (9.5 mm) Shank Diameter, 2-1/2"(64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QBM-3001000 Right Hand Quick Change Boring Tool for Milling Machine, Solid Carbide Tool, 0.300"(7.62 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.145" (3.70 mm)Tip of Centerline to Cutting Tip, 0.008" (0.20 mm) Tool Radius, 0.3750" (9.5 mm) Shank Diameter, 2-1/2"(64 mm) Overall Length
found at Amazon Marketplace
56.25 £
Shipping costs: 3.55 £
Glanze A10M SCLCR 3 Indexable Boring Bar with Coolant Through, Steel with Black Oxide Plating from Glanze
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Glanze A10M SCLCR 3 Indexable Boring Bar with Coolant Through, Steel with Black Oxide Plating
from Glanze
found at Amazon Marketplace
42.85 £
Shipping costs: 4.15 £
Micro 100 QRB-2301250X Quick Change Reverse Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.230" (5.85 mm) Minimum Bore Diameter, 0.500"(12.7 mm) Maximum Bore Depth, 0.138"(3.51 mm) Tool Head Length, 0.100"(2.54 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3125"(7.9 mm) Shank Diameter, 3"(76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QRB-2301250X Quick Change Reverse Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.230" (5.85 mm) Minimum Bore Diameter, 0.500"(12.7 mm) Maximum Bore Depth, 0.138"(3.51 mm) Tool Head Length, 0.100"(2.54 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3125"(7.9 mm) Shank Diameter, 3"(76 mm) Overall Length
found at Amazon Marketplace
18.11 £
Shipping costs: 3.60 £
Micro 100 QIT-110600X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.110" (2.79 mm) Minimum Bore Diameter, 0.030" (0.76 mm) Projection, 0.600" (15.2 mm) Maximum Bore Depth, 0.016" (0.041 mm) Offset Point, 32 to 64 Threads per Inch, 0.1875" (4.8 mm) Shank Diameter, 2" (51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QIT-110600X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.110" (2.79 mm) Minimum Bore Diameter, 0.030" (0.76 mm) Projection, 0.600" (15.2 mm) Maximum Bore Depth, 0.016" (0.041 mm) Offset Point, 32 to 64 Threads per Inch, 0.1875" (4.8 mm) Shank Diameter, 2" (51 mm) Overall Length
found at Amazon Marketplace
37.28 £
Shipping costs: 3.57 £
HHIP 1001-0743 Round Shank Indexable Boring Bar, 3-5/8" x 1/2" from HHIP
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
HHIP 1001-0743 Round Shank Indexable Boring Bar, 3-5/8" x 1/2"
from HHIP
found at Amazon Marketplace
25.93 £
Shipping costs: 3.83 £
Micro 100 QFR-093-20X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.093" (2.36 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-093-20X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.093" (2.36 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.250" (31.8 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length
found at Amazon Marketplace
95.91 £
Shipping costs: 3.83 £
Micro 100 QBM-4601000X Right Hand Quick Change Boring Tool for Milling Machine, Solid Carbide Tool, AlTiN Coated, 0.460"(11.7 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.225" (5.70 mm)Tip of Centerline to Cutting Tip, 0.008" (0.20 mm) Tool Radius, 0.5000" (12.7 mm) Shank Diameter, 2-1/2"(64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QBM-4601000X Right Hand Quick Change Boring Tool for Milling Machine, Solid Carbide Tool, AlTiN Coated, 0.460"(11.7 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.225" (5.70 mm)Tip of Centerline to Cutting Tip, 0.008" (0.20 mm) Tool Radius, 0.5000" (12.7 mm) Shank Diameter, 2-1/2"(64 mm) Overall Length
found at Amazon Marketplace
85.01 £
Shipping costs: 3.97 £
Micro 100 DBM-060250X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.060" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 8 mm Shank Diameter, 1.5" Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 DBM-060250X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.060" Minimum Bore Diameter, 0.250" Maximum Bore Depth, 8 mm Shank Diameter, 1.5" Overall Length
found at Amazon Marketplace
44.76 £
Shipping costs: 3.60 £
Micro 100 QFG-490-078X Quick Change Face Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.078" (1.98 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.500" (12.7 mm) Minimum Groove Diameter, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFG-490-078X Quick Change Face Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.078" (1.98 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.500" (12.7 mm) Minimum Groove Diameter, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
68.75 £
Shipping costs: 3.83 £
Micro 100 HRM-050-50 Half Round Carbide Blank, Metric Dimensions, 2.5 mm Half of Diameter, 5 mm Diameter, 50 mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 HRM-050-50 Half Round Carbide Blank, Metric Dimensions, 2.5 mm Half of Diameter, 5 mm Diameter, 50 mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
7.27 £
Shipping costs: 3.55 £
Micro 100 MBBM-008030X Miniature Right Hand Boring Tool, Aluminum/Tin Coated, Metric Dimensions, 0.8 mm Minimum Bore Diameter, 3.00 mm Maximum Bore Depth, 3 mm Shank Diameter, 38 mm Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 MBBM-008030X Miniature Right Hand Boring Tool, Aluminum/Tin Coated, Metric Dimensions, 0.8 mm Minimum Bore Diameter, 3.00 mm Maximum Bore Depth, 3 mm Shank Diameter, 38 mm Overall Length, Solid Carbide Tool
found at Amazon Marketplace
30.14 £
Shipping costs: 3.53 £
HHIP 6004-6031 TCMT-32.51-HF Triangle +Rake Insert from HHIP
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
HHIP 6004-6031 TCMT-32.51-HF Triangle +Rake Insert
from HHIP
found at Amazon Marketplace
11.64 £
Shipping costs: 3.62 £
Aloris Tool BB-6 Reversible Boring Bar from Aloris Tool
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Aloris Tool BB-6 Reversible Boring Bar
found at Amazon Marketplace
209.43 £
Shipping costs: 7.92 £
Micro 100 QRB-300750 Quick Change Reverse Boring Tool, Solid Carbide Tool, 0.300" (7.62 mm) Minimum Bore Diameter, 0.750"(19.1 mm) Maximum Bore Depth, 0.138"(3.51 mm) Tool Head Length, 0.110"(2.80 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3125"(7.9 mm) Shank Diameter, 2.5"(64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QRB-300750 Quick Change Reverse Boring Tool, Solid Carbide Tool, 0.300" (7.62 mm) Minimum Bore Diameter, 0.750"(19.1 mm) Maximum Bore Depth, 0.138"(3.51 mm) Tool Head Length, 0.110"(2.80 mm) Projection, 0.008"(0.20 mm) Tool Radius, 0.3125"(7.9 mm) Shank Diameter, 2.5"(64 mm) Overall Length
found at Amazon Marketplace
41.42 £
Shipping costs: 3.64 £
Micro 100 DBM-2901250X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.290" Minimum Bore Diameter, 1.25" Maximum Bore Depth, 8 mm Shank Diameter, 2.5" Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 DBM-2901250X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.290" Minimum Bore Diameter, 1.25" Maximum Bore Depth, 8 mm Shank Diameter, 2.5" Overall Length
found at Amazon Marketplace
46.35 £
Shipping costs: 3.65 £
Micro 100 QFR-017-4X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.017" (0.43 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.180" (4.6 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-017-4X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.017" (0.43 mm) Groove Width, 0.030" (0.76 mm) Projection, 0.180" (4.6 mm) Minimum Bore Diameter, 0.250" (6.4 mm) Maximum Bore Depth, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length
found at Amazon Marketplace
7.50 £
Shipping costs: 3.55 £
Micro 100, BB-100600S, Right Hand Boring Tool (No Cutting Radius), 0.100" Minimum Bore Diameter, 0.600" Maximum Bore Depth, 0.025" Projection, 1/8" Shank Diameter, 1-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-100600S, Right Hand Boring Tool (No Cutting Radius), 0.100" Minimum Bore Diameter, 0.600" Maximum Bore Depth, 0.025" Projection, 1/8" Shank Diameter, 1-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
23.25 £
Shipping costs: 3.55 £
Micro 100 QIT-100350X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.100 (2.54 mm) Minimum Bore Diameter, 0.025 (0.64 mm) Projection, 0.350 (8.89 mm) Maximum Bore Depth, 0.014 (0.036 mm) Offset Point, 32 to 64 Threads per Inch, 0.1875 (4.8 mm) Shank Diameter, 1.5 (38 mm) Overall Length by Micro 100 from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QIT-100350X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.100 (2.54 mm) Minimum Bore Diameter, 0.025 (0.64 mm) Projection, 0.350 (8.89 mm) Maximum Bore Depth, 0.014 (0.036 mm) Offset Point, 32 to 64 Threads per Inch, 0.1875 (4.8 mm) Shank Diameter, 1.5 (38 mm) Overall Length by Micro 100
found at Amazon Marketplace
37.43 £
Shipping costs: 3.55 £
Micro 100 QIT-4901500 Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, 0.490" (12.4 mm) Minimum Bore Diameter, 0.120" (3.05 mm) Projection, 1.500" (38.1 mm) Maximum Bore Depth, 0.069" (1.75 mm) Offset Point, 8 to 24 Threads per Inch, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QIT-4901500 Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, 0.490" (12.4 mm) Minimum Bore Diameter, 0.120" (3.05 mm) Projection, 1.500" (38.1 mm) Maximum Bore Depth, 0.069" (1.75 mm) Offset Point, 8 to 24 Threads per Inch, 0.5000" (12.7 mm) Shank Diameter, 3" (76 mm) Overall Length
found at Amazon Marketplace
86.00 £
Shipping costs: 3.55 £
Micro 100 QPR-3001000 Quick Change Profiling Tool, Solid Carbide Tool, 0.300" (7.62 mm) Minimum Bore Diameter, 1.000" (15.4 mm) Maximum Bore Depth, 0.110" (2.79 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QPR-3001000 Quick Change Profiling Tool, Solid Carbide Tool, 0.300" (7.62 mm) Minimum Bore Diameter, 1.000" (15.4 mm) Maximum Bore Depth, 0.110" (2.79 mm) Projection, 0.008" (0.20 mm) Tool Radius, 0.3125" (7.9 mm) Shank Diameter Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
44.82 £
Shipping costs: 3.68 £
Micro 100 HBB-040187X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.040" Minimum Bore Diameter, 0.187" Maximum Bore Depth, 0.1250" Shank Diameter, 0.035" Neck Diameter, 1.5" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 HBB-040187X Helical Back Rake Boring Tool, Aluminum/Tin Coated, 0.040" Minimum Bore Diameter, 0.187" Maximum Bore Depth, 0.1250" Shank Diameter, 0.035" Neck Diameter, 1.5" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
25.64 £
Shipping costs: 3.53 £
Micro 100 DBM-200800X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.200" Minimum Bore Diameter, 0.800" Maximum Bore Depth, 8 mm Shank Diameter, 2.5" Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 DBM-200800X Coolant Through Boring Tools for MIniDigi Boring Heads, AlTiN Coated, 0.200" Minimum Bore Diameter, 0.800" Maximum Bore Depth, 8 mm Shank Diameter, 2.5" Overall Length
found at Amazon Marketplace
46.35 £
Shipping costs: 3.65 £
HHIP 1029-0750 TBBS12-3 Indexable Boring Bar from HHIP
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
HHIP 1029-0750 TBBS12-3 Indexable Boring Bar
from HHIP
found at Amazon Marketplace
38.83 £
Shipping costs: 5.39 £
KYOCERA MBS-2000L1000 Micro Boring Bar, Carbide, 0.2500" Shank Diameter, 1.000" Max Bore Depth, 3" Length from KYOCERA
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
KYOCERA MBS-2000L1000 Micro Boring Bar, Carbide, 0.2500" Shank Diameter, 1.000" Max Bore Depth, 3" Length
from KYOCERA
found at Amazon Marketplace
31.10 £
Shipping costs: 3.60 £
KYOCERA MBS-0236L051 Micro Boring Bar, Carbide, 3 mm Shank Diameter, 1.3 mm Max Bore Depth, 38 mm Length from KYOCERA
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
KYOCERA MBS-0236L051 Micro Boring Bar, Carbide, 3 mm Shank Diameter, 1.3 mm Max Bore Depth, 38 mm Length
from KYOCERA
found at Amazon Marketplace
26.80 £
Shipping costs: 3.56 £
Micro 100, 20-0852, Indexable 90° Boring & Facing with 95° Approach Right Hand Coolant Thru Boring Bar, .860" Minimum Bore Diameter, .432" Dimension Over Insert, 3/4" Shank Diameter, 5.9" Overall Length, CCMT 31.51 Insert Style from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, 20-0852, Indexable 90° Boring & Facing with 95° Approach Right Hand Coolant Thru Boring Bar, .860" Minimum Bore Diameter, .432" Dimension Over Insert, 3/4" Shank Diameter, 5.9" Overall Length, CCMT 31.51 Insert Style
found at Amazon Marketplace
83.35 £
Shipping costs: 4.47 £
Micro 100 QPF-060400 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.060" (1.52 mm) Minimum Bore Diameter, 0.400" (10.2 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QPF-060400 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.060" (1.52 mm) Minimum Bore Diameter, 0.400" (10.2 mm) Maximum Bore Depth, 0.050" (1.27 mm) Projection, 0.005" (0.13 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 1.5" (38 mm) Overall Length
found at Amazon Marketplace
28.95 £
Shipping costs: 3.55 £
KYOCERA MBE-0250.125 Micro Boring Bar, Carbide, 0.1250" Shank Diameter, 0.125" Max Bore Depth, 1.5000" Length from KYOCERA
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
KYOCERA MBE-0250.125 Micro Boring Bar, Carbide, 0.1250" Shank Diameter, 0.125" Max Bore Depth, 1.5000" Length
from KYOCERA
found at Amazon Marketplace
23.01 £
Shipping costs: 3.57 £
Aloris Tool CA-4Q-2000 Qualified Boring Bar Holder from Aloris Tool
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Aloris Tool CA-4Q-2000 Qualified Boring Bar Holder
found at Amazon Marketplace
291.81 £
Shipping costs: 5.12 £
Micro 100, BB-290600SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.290" Minimum Bore Diameter, 0.600" Maximum Bore Depth, 0.073" Projection, 5/16" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100, BB-290600SX, Right Hand Boring Tool (No Cutting Radius), AlTiN Coated, 0.290" Minimum Bore Diameter, 0.600" Maximum Bore Depth, 0.073" Projection, 5/16" Shank Diameter, 2-1/2" Overall Length, Solid Carbide Tool
found at Amazon Marketplace
41.95 £
Shipping costs: 3.65 £
Micro 100 QFR-079-16 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.079" (2.00 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.370" (9.4 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.3750" (9.5 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-079-16 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.079" (2.00 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.370" (9.4 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.3750" (9.5 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
64.94 £
Shipping costs: 3.68 £
Micro 100 QHK-2 Quick Change Hex Key, 1/8" (QZST-SR10J/QZST20RIV) from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QHK-2 Quick Change Hex Key, 1/8" (QZST-SR10J/QZST20RIV)
found at Amazon Marketplace
4.04 £
Shipping costs: 3.53 £
Micro 100 QBB-140600X Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.140"(3.56 mm) Minimum Bore Diameter, 0.600" (15.2 mm) Maximum Bore Depth, 0.035" (0.89 mm) Projection, 0.03" (0.08 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 2"(51 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QBB-140600X Right Hand Cutting Radius Quick Change Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.140"(3.56 mm) Minimum Bore Diameter, 0.600" (15.2 mm) Maximum Bore Depth, 0.035" (0.89 mm) Projection, 0.03" (0.08 mm) Tool Radius, 0.1875" (4.8 mm) Shank Diameter, 2"(51 mm) Overall Length
found at Amazon Marketplace
30.58 £
Shipping costs: 3.56 £
Micro 100 QFR-156-16X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.156" (3.96 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-156-16X Quick Change Full Radius Grooving Tool, Solid Carbide Tool, AlTiN Coated, 0.156" (3.96 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
20.32 £
Shipping costs: 3.83 £
Micro 100 QFR-125-12 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.125" (3.18 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 0.750" (19.1 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length from Micro 100
found at Amazon Marketplace
last verified on 2019-06-16 at 18:24; the price may have changed since.
Micro 100 QFR-125-12 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.125" (3.18 mm) Groove Width, 0.150" (3.81 mm) Projection, 0.495" (12.6 mm) Minimum Bore Diameter, 0.750" (19.1 mm) Maximum Bore Depth, 0.5000" (12.7 mm) Shank Diameter, 2.5" (64 mm) Overall Length
found at Amazon Marketplace
89.06 £
Shipping costs: 3.83 £